GE IC693CBL334 I/O 模块连接器电缆 有 24 针连接器

【产品详情】

GE Fanuc IC693CBL334 系列 90-30 I/O 模块连接器电缆是一种非屏蔽的 0.5 米长的 I/O 模块电缆，两端都有 24 针连接器。该电缆专为GE Fanuc 90-30系列PLC系统而设计，可用于将具有双32针连接器的24点I / O模块连接到接线端子快速连接组件。IC693CBL334连接器电缆专为与 90-30 系列IC693ACC329、IC693ACC337 和 IC693ACC334 I/O 模块配合使用而设计。IC693CBL334 连接器电缆作为电缆套件提供，包括 0.5 米长的左侧 I/O 连接器电缆（IC693CBL333 电缆）和右侧 I/O 连接器电缆（IC693CBL334 电缆）。IC693CBL334套件的直角 I/O 连接器电缆与 24 点 I/O 模块上的 32 针连接器或接线端子快速连接 （TBQC） 面板上的单个连接器（一端是连接器）连接，另一端是连接器，接线端子上的连接器。

GE Fanuc IC693CBL334连接器电缆旨在取代过时的GE IC693CBL323、IC693CBL322和IC693CBL321电缆，它具有90度（直角）连接器，减少了PLC连接的间隙空间，适用于具有双连接器的I / O模块。IC693CBL334连接器电缆在总线上连接的现场设备和可编程逻辑控制器之间提供可靠的信号传输。为了获得最佳接线连接，IC693CBL334 I/O 连接器电缆与 I/O 模块、TBQC 和接线端子上的相应连接器引脚进行引脚对引脚连接，即引脚 A1 到引脚 A1、引脚 A2 到引脚 A2 等。IC693CBL334 连接器电缆的最大电缆连接长度为 0.5 米，最大连接器深度为 2.5 英寸。

IC693CBL334电缆是柔性的，用于将PLC系统与现场设备连接。90-30 系列 PLC 系统配备 4 个系统 LED 指示灯，分别是“PWR”、“OK”、“运行”和“BATT”指示灯。该连接器能够在不同的区域和环境中使用。90-30系列系统可以使用RS-485端口连接到个人计算机，并使用编程软件进行配置。PLC系统配有用于内部通信的以太网端口。它也可以连接到PanelMate显示终端，用户可以在其中查看信息。IC693CBL334电缆配有一对纯色线和黑色示踪剂。它是一种非屏蔽电缆，使用工业级材料制造。电缆易于安装和在需要时更换。它是 90-30 系列 PLC 的附件。

GE IC693CBL334 I/O 模块连接器电缆 有 24 针连接器

【英文介绍】

GE Fanuc IC693CBL334 Series 90-30 I/O Module Connector cable is an unshielded 0.5 m long I/O module cable with 24-pin connectors at both ends. The cable is designed for GE Fanuc 90-30 series PLC systems and can be used to connect 24-point I/O modules with dual 32-pin connectors to terminal quick-connect assemblies. The IC693CBL334 connector cable is designed for use with the 90-30 series IC693ACC329, IC693ACC337, and IC693ACC334 I/O modules. The IC693CBL334 Connector cable is provided as a cable kit and includes a 0.5 meter left side I/O connector cable (IC693CBL333 cable) and right side I/O connector cable (IC693CBL334 cable). The right Angle I/O connector cable of the IC693CBL334 kit is connected to a 32-pin connector on the 24-point I/O module or a single connector on the Terminal Quick Connection (TBQC) panel (one end is a connector) and the other end is a connector, a connector on the terminal.

The GE Fanuc IC693CBL334 connector cable is designed to replace the obsolete GE IC693CBL323, IC693CBL322, and IC693CBL321 cables with a 90-degree (right-angle) connector that reduces clearance space for PLC connections and is suitable for I/O modules with dual connectors. The IC693CBL334 connector cable provides reliable signal transmission between field devices connected on the bus and programmable logic controllers. For optimal wiring connections, the IC693CBL334 I/O connector cable is pin-to-pin connected to the I/O module, TBQC and the corresponding connector pins on the terminal, i.e., pin A1 to pin A1, pin A2 to pin A2, etc. The IC693CBL334 connector cable has a maximum cable connection length of 0.5 meters and a maximum connector depth of 2.5 inches.

The IC693CBL334 cable is flexible and is used to connect the PLC system to the field equipment. The 90-30 series PLC system is equipped with four system LED indicators, namely "PWR", "OK", "Run" and "BATT" indicators. The connector can be used in different areas and environments. The 90-30 series systems can be connected to a personal computer using an RS-485 port and configured using programming software. The PLC system has an Ethernet port for internal communication. It can also be connected to the PanelMate display terminal where the user can view information. The IC693CBL334 cable comes with a pair of solid color wires and a black tracer. It is an unshielded cable manufactured using industrial-grade materials. Cables are easy to install and replace when needed. It is an accessory of 90-30 series PLC.

GE IC693CBL334 I/O 模块连接器电缆 有 24 针连接器

【其他型号推荐】