GE IC693CBL332  连接器电缆 快速连接电缆

【产品详情】

GE Fanuc IC693CBL332电缆是带有 90 度连接器的快速连接电缆。它由GE Fanuc设计，用于代替带有直连接器的旧电缆。它将GE系列90-30系统与不同的工业现场设备连接起来。它是带有两个带紧固器的 24 针连接器的右侧电缆。它为工业自动化应用提供了可靠的连接。IC693CBL332电缆未屏蔽。电缆导体采用高级材料开发，额定电流为 1.6 安培。IC693CBL332电缆带有弯曲限制，在与PLC系统连接时不应超过该限制。90-30系列PLC系统是GE Fanuc系列中广泛使用的PLC。

前面板上带有RS-485端口的计算机可用于配置PLC。PLC也可以用计算机轻松编程。PLC的前部配有网络端口，状态指示灯和其他端口。状态指示灯显示电池状态、功率流和 PLC 的运行状态。PLC使用易于更换的电池。连接器电缆完全符合全球工业和环境标准。IC693CBL332电缆与GE Fanuc IC694系列PLC设备一起使用。它连接到 PLC 的接线端子。该附件模块可与I/O适配器和不同模块的接线端子一起使用。PLC系统应存在零电压，并且在设置过程中应与主电源断开连接。

GE IC693CBL332  连接器电缆 快速连接电缆

【英文介绍】

The GE Fanuc IC693CBL332 cable is a fast connection cable with a 90 degree connector. It was designed by GE Fanuc to replace older cables with straight connectors. It connects GE series 90-30 systems with different industrial field equipment. It is a right side cable with two 24-pin connectors with tighteners. It provides a reliable connection for industrial automation applications. The IC693CBL332 cable is not shielded. The conductor is developed with advanced materials and is rated at 1.6 amps. The IC693CBL332 cable has a bending limit that should not be exceeded when connected to the PLC system. The 90-30 series PLC system is a widely used PLC in the GE Fanuc series.

A computer with an RS-485 port on the front panel can be used to configure a PLC. PLCS can also be easily programmed with a computer. The front of the PLC is equipped with network ports, status indicators and other ports. The status indicator shows the battery status, power flow, and PLC operating status. PLCS use batteries that are easy to replace. Connector cables are fully compliant with global industrial and environmental standards. The IC693CBL332 cable is used with GE Fanuc IC694 series PLC equipment. It is connected to the PLC terminal. The accessory module can be used with I/O adapters and terminals for different modules. The PLC system should have zero voltage and should be disconnected from the main power supply during setup.

GE IC693CBL332  连接器电缆 快速连接电缆

【其他型号推荐】