GE IC693CBL331 连接器电缆  I/O 接口的面板连接器

【产品详情】

IC693CBL331电缆是GE Fanuc 90-30系列电缆，长度为2米。它是一个 24 针 90 度连接器，用于将 PLC 系统与现场设备连接。该电缆用于工业自动化应用。它取代了现在过时的旧直连接器电缆。90 度电缆连接器的深度为 2 英寸。连接器配有一个拧紧器，可以旋转以稳定保持。IC693CBL331电缆结构坚固，本质上是灵活的。这种工业电缆采用工业级材料制造，可以承受阳光直射和热量。但是，它应该远离电磁噪声。

IC693CBL331电缆为黑色。它与I/O面板适配器或富士通模块完全兼容。24 针连接器以直角连接在 PLC 的正面，这减少了该模块的间隙。连接器用于模块的右侧，它与输入或输出电路组连接。IC693CBL331电缆导体采用优质材料制造，额定电流为 1.2 安培。电缆应从一个引脚连接到另一个引脚。90-30系列PLC用于不同的行业，以支持不同的应用需求。PLC可以直接连接到计算机，以便使用RS-485端口轻松配置。PLC 在前面板上有 4 个不同的 LED 指示灯，可告知操作员不同的系统状况。

GE Fanuc IC693CBL331 是一种带有 24 针 I/O 接口的面板连接器，用于连接接线端子。这些 24 针连接器在 PLC 前端成直角对齐，从而减少了该模块所需的间隙空间。除电缆长度和连接器方向外，此系统具有相同的连接器。该IC693CBL331在 32 点模块和 16 点模块中都有应用。32 点模块具有双 24 针连接器。从正面观察时，IC693CBL331电缆用于其右端，并与输入或输出电路组接口。16 点模块配有 TBQC 面板适配器，该模块用于电路连接。

IC693CBL331增加了额外的 2 英寸深度，这由安装 PLC 的机柜深度补偿。IC693CBL331中使用的每个导体的额定电流为1.2 A。如果系统中存在需要大于1.2A额定电流的现场设备，则不规定TBQC组件。在这些条件下，应使用具有指定标准的端子板。如果该模块使用额定电流较高的 16 点模块，则必须在最大负载条件下使用额定电流较低的导体。这些电缆必须将一个引脚连接到另一个引脚，电缆长度应为 3m，其中连接器在一端以直角对齐，剥去的引线应在另一端。

GE IC693CBL331 连接器电缆  I/O 接口的面板连接器

【英文介绍】

The IC693CBL331 cable is a GE Fanuc 90-30 series cable with a length of 2 meters. It is a 24-pin 90-degree connector used to connect PLC systems to field equipment. The cable is used in industrial automation applications. It replaces the old straight connector cable that is now obsolete. The depth of the 90 degree cable connector is 2 inches. The connector is equipped with a tightener that can be rotated for stable holding. The IC693CBL331 cable is robust and flexible in nature. This industrial cable is made of industrial-grade materials that can withstand direct sunlight and heat. However, it should be kept away from electromagnetic noise.

The IC693CBL331 cable is black. It is fully compatible with I/O panel adapters or Fujitsu modules. 24-pin connectors are connected at right angles to the front of the PLC, which reduces the gap in the module. The connector is used on the right side of the module, which is connected to the input or output circuit group. The IC693CBL331 cable conductor is made of high quality material and is rated at 1.2 amps. The cable should be connected from one pin to the other. The 90-30 series PLC is used in different industries to support different application needs. The PLC can be connected directly to the computer for easy configuration using the RS-485 port. The PLC has 4 different LED indicators on the front panel to inform the operator of different system conditions.

The GE Fanuc IC693CBL331 is a panel connector with a 24-pin I/O interface for connecting wiring terminals. These 24-pin connectors are aligned at right angles at the front of the PLC, reducing the gap space required for the module. This system has the same connector except for the cable length and connector orientation. The IC693CBL331 is available in both 32-point and 16-point modules. The 32-point module has dual 24-pin connectors. When viewed from the front, the IC693CBL331 cable is used for its right end and interfaces with the input or output circuit group. The 16-point module is equipped with a TBQC panel adapter, which is used for circuit connections.

The IC693CBL331 adds an additional 2 inches of depth, which is compensated by the depth of the cabinet where the PLC is installed. The current rating for each conductor used in IC693CBL331 is 1.2 A. If there is field equipment in the system that requires A rated current greater than 1.2A, the TBQC component is not specified. In these conditions, a terminal board with a specified standard should be used. If the module uses a 16-point module with a higher current rating, a conductor with a lower current rating must be used under maximum load conditions. These cables must connect one pin to the other and the cable length should be 3m, where the connector is aligned at a right Angle at one end and the stripped lead should be at the other end.

GE IC693CBL331 连接器电缆  I/O 接口的面板连接器

【其他型号推荐】