GE IC693CBL327 快速连接 I/O 接口

【产品详情】

 IC693CBL327是一个直角方向的快速连接 I/O 接口。它具有 24 针连接器，用于替换IC693CBL315。该电缆通常与IC693CBL328一起使用，长度为 10 英尺或 3 米，另一端带有飞线，用于连接到用户提供的端子。

IC693CBL327是一种输入和输出电缆，专门设计用于 90-30 系列可编程逻辑控制器 （PLC） 平台的高密度 I/O 模块。该电缆与IC693CBL328一起使用，与IC693MDL654、IC693MDL655、IC693MDL752和IC693MDL753模块一起使用。因此，IC693CBL327 24 针 I/O 电缆不足以为 32 点模块提供端接连接。这样，IC693CBL328与IC693CBL327配对。IC693CBL327安装在左侧连接器上，而IC693CBL328安装在右侧或简单地安装在IC693CBL327旁边。两根 I/O 电缆的连接器深度相同，距离主机 I/O 模块的前面板 2.0 英寸。IC693CBL327 PLC侧连接器是直角方向的富士通FCN-365S024-AU连接器，总长度为10英尺或3米。该电缆的另一端是飞线或剥线，可以连接到用户提供的I / O端子，无论是PCB底座还是标准接线端子组件。它也可以与 16 点 I/O 模块一起使用，该模块与 TBQC I/O 面板适配器一起安装。IC693CBL327的每根电线尺寸为 #24 AWG，单个额定电流为 1.2 安培。信号线采用双绞线和颜色编码安装，便于识别电线。电线从头到尾连接，引脚 1 连接到电线 1。该电缆取代了IC693CBL315 I/O 电缆，IC693CBL327通过电缆 PLC 侧连接器的方向提供更多的工作空间。

GE Fanuc IC693CBL327电缆是GE Fanuc 90-30 PLC模块的附件。GE Fanuc IC693CBL327电缆设计用于将 PLC 模块连接到不同的现场设备。该电缆的一端有一个母配接连接器，另一端有剥皮和镀锡的电线。GE Fanuc IC693CBL327电缆已预接线，可作为一对电缆（如IC693CBL328电缆）的一部分提供。此电缆是非屏蔽电缆。它长 10 英尺或 3 米，一端有一个 24 针 D 连接器。此连接器是直角 24 针 D 连接器。GE Fanuc IC693CBL327电缆与GE Fanuc IC694MDL752和IC694MDL753以及其他模块兼容。

GE Fanuc IC693CBL327电缆的连接器深度额定值为 2 英寸或 51 毫米。这意味着电缆将从其连接的GE Fanuc系列2-51 PLC模块的表面伸出90英寸或30毫米的长度。如果GE Fanuc IC693CBL327电缆连接到的PLC模块安装在机柜内，请确保机柜足够深以容纳PLC模块的深度等级和电缆的连接器深度等级，或者机柜可能无法为PLC提供足够的保护，并且PLC和电缆都可能受到损坏，电缆可能会断开。

GE IC693CBL327 快速连接 I/O 接口

【英文介绍】

The IC693CBL327 is a right-angle fast connection I/O interface. It has a 24-pin connector to replace the IC693CBL315. The cable is typically used with the IC693CBL328 and is 10 feet or 3 meters in length with a fly wire on the other end for connection to the user-supplied terminals.

The IC693CBL327 is an input and output cable specifically designed for high-density I/O modules on Series 90-30 programmable logic controller (PLC) platforms. The cable is used with the IC693CBL328 and with the IC693MDL654, IC693MDL655, IC693MDL752 and IC693MDL753 modules. Therefore, the IC693CBL327 24-pin I/O cable is not sufficient to provide termination connections for 32-point modules. Thus, IC693CBL328 is paired with IC693CBL327. The IC693CBL327 is installed on the left connector, while the IC693CBL328 is installed on the right or simply next to the IC693CBL327. The connectors of the two I/O cables have the same depth and are 2.0 inches away from the front panel of the host I/O module. The IC693CBL327 PLC side connector is a right Angle Fujitsu FCN-365S024-AU connector with an overall length of 10 feet or 3 meters. The other end of this cable is a fly or strip wire that can be connected to a user-supplied I/O terminal, whether it is a PCB base or a standard terminal assembly. It can also be used with the 16-point I/O module, which is installed with the TBQC I/O panel adapter. Each wire of the IC693CBL327 measures #24 AWG and is individually rated at 1.2 amps. The signal lines are installed with twisted pair and color coding for easy identification of the wires. Wire is connected from end to end and pin 1 is connected to wire 1. The cable replaces the IC693CBL315 I/O cable, which provides more working space through the direction of the cable PLC side connector.

The GE Fanuc IC693CBL327 cable is an accessory to the GE Fanuc 90-30 PLC module. The GE Fanuc IC693CBL327 cable is designed to connect PLC modules to different field devices. The cable has a female mating connector at one end and a skinned and tinned wire at the other end. The GE Fanuc IC693CBL327 cable is pre-wired and can be supplied as part of a pair of cables such as the IC693CBL328 cable. This cable is unshielded. It is 10 feet or 3 meters long and has a 24-pin D connector at one end. This connector is a right Angle 24-pin D connector. The GE Fanuc IC693CBL327 cable is compatible with the GE Fanuc IC694MDL752 and IC694MDL753 as well as other modules.

The GE Fanuc IC693CBL327 cable has a connector depth rating of 2 inches or 51 mm. This means that the cable will extend 90 inches or 30 mm from the surface of the GE Fanuc Series 2-51 PLC module to which it is attached. If the PLC module to which the GE Fanuc IC693CBL327 cable is connected is installed in a cabinet, make sure that the cabinet is deep enough to accommodate the depth class of the PLC module and the connector depth class of the cable, or the cabinet may not provide adequate protection for the PLC and both the PLC and the cable may be damaged and the cable may break.

GE IC693CBL327 快速连接 I/O 接口

【其他型号推荐】