IC693CBL312 机架到机架扩展电缆  I/O总线扩展电缆

【产品详情】

概述

特征：

多才多艺

功能范围广

从简单的继电器更换为复杂的中档自动化

分立式和模拟量 I/O 模块

创新的架构和模块化设计

随着公司的发展扩展您的系统

凭借其模块化设计、100 多种不同的 I/O 模块和一系列 CPU 选项，90-30 系列为您提供了多功能性 根据您的特定性能需求配置系统。卓越的网络和通信功能使您能够通过一个非专有网络进行联网、传输数据、上传和下载程序以及执行诊断。集成到 90-30 系列中的运动控制有助于实现高性能的点对点应用，并支持各种电机类型和系统架构。

IC693CBL312是GE发那科制造的I/O总线扩展电缆。它是一根 0.5 英尺（0.15 米）长的连续屏蔽电缆。电缆的一端配有一个 25 针 D 公连接器，而电缆的另一端有一个双头连接器。其中一个连接器是母连接器，另一个是公连接器。IC693CBL312是 I/O 总线扩展电缆，则视为 Y 形电缆。电缆的主要用途是将 IO 总线扩展到远程或扩展底板。该电缆与 90-30 系列系统兼容。如果用户需要在系统中安装更多 I/O 插槽，或者希望底板远离 CPU，则此IC693CBL312星形电缆是解决方案的必要组件。

用户在安装 I/O 扩展系统时最多使用 7 根电缆。但是，CPU 底板和系统中最后一个扩展板之间的电缆的总长度不能超过 50 英尺或 15 米。 要安装IC693CBL312，请将单公连接器与位于 CPU 底板上的 25 针母头端口连接。要使用电缆设置系统，需要将单个公连接器连接到 CPU 底板上的 25 针母连接器。这是在右手边。接下来，使用电缆双连接器侧的公头与位于系统中第一个扩展底板上的 25 针母头连接。如果忽略电缆长度准则，PLC 系统可能会出现故障。 用户还必须注意，当 I/O 扩展底板通电时，不要连接或断开任何电缆。

为了正确进行菊花链布线，具有 693 针 D 型公连接器的 IC312CBL25 I/O 基座扩展电缆的单端连接到 CPU 底板上的 25 针 D 型母连接器。双连接器端的 25 针插头连接到系统中第一个扩展底板的 25 针母连接器。电缆双端上的另一个 25 针母连接器连接到第二根 I/O 总线扩展电缆的 25 针公连接器，以继续 I/O 总线扩展链。达到所需的 I/O 扩展长度后，最后一条 I/O 总线扩展电缆上的 25 针母连接器将使用终结器插头端接。请注意，可以连接到 I/O 扩展系统的最大电缆数为 7，CPU 底板与最后一个远程底板之间的最大可接受距离为 213 米（700 英尺）。

IC693CBL312 机架到机架扩展电缆  I/O总线扩展电缆

【英文介绍】

summarize

Features:

versatile

Wide range of functions

Change from simple relays to complex mid-range automation

Discrete and analog I/O modules

Innovative architecture and modular design

Expand your system as your company grows

With its modular design, more than 100 different I/O modules and a range of CPU options, the 90-30 series gives you the versatility to configure your system according to your specific performance needs. Superior networking and communication capabilities enable you to network, transfer data, upload and download programs, and perform diagnostics over a non-proprietary network. Motion control integrated into the 90-30 series facilitates high-performance point-to-point applications and supports a wide range of motor types and system architectures.

The IC693CBL312 is an I/O bus expansion cable manufactured by GE Fanuc. It is a 0.5 foot (0.15 m) long continuous shielded cable. One end of the cable is fitted with a 25-pin D male connector, while the other end of the cable has a double-ended connector. One connector is a female connector and the other is a male connector. IC693CBL312 is an I/O bus expansion cable and is considered a Y-shaped cable. The main purpose of the cable is to extend the IO bus to a remote or to extend the baseboard. The cable is compatible with 90-30 series systems. If the user needs to install more I/O slots in the system, or wants the baseboard to be away from the CPU, this IC693CBL312 star cable is a necessary component of the solution.

Users can use up to 7 cables when installing an I/O expansion system. However, the total length of the cable between the CPU baseboard and the last expansion board in the system cannot exceed 50 feet or 15 meters. To install the IC693CBL312, connect the single male connector to the 25-pin female port located on the CPU baseboard. To set up the system using cables, you need to connect a single male connector to a 25-pin female connector on the CPU baseboard. This is on the right hand side. Next, the male head on the double connector side of the cable is connected to the 25-pin female head located on the first expansion baseplate in the system. If the cable length criteria are ignored, the PLC system may fail. Users must also take care not to connect or disconnect any cables when the I/O expansion baseboard is energized.

For proper Daisy chain wiring, the single end of the IC312CBL25 I/O base expansion cable with a 693-pin D-male connector is connected to a 25-pin D-female connector on the CPU baseboard. The dual-connector end 25-pin plug connects to the first 25-pin female connector in the system that extends the backboard. Another 25-pin female connector on both ends of the cable connects to the 25-pin male connector of the second I/O bus expansion cable to continue the I/O bus expansion chain. When the desired I/O extension length is reached, the 25-pin female connector on the last I/O bus extension cable is terminated using a finalizer plug. Note that the maximum number of cables that can be connected to the I/O expansion system is 7, and the maximum acceptable distance between the CPU backboard and the last remote backboard is 213 meters (700 feet).

IC693CBL312 机架到机架扩展电缆  I/O总线扩展电缆

【其他型号推荐】