GE IC693CBL311  I/O 接口电缆组件 APM 模块

【产品详情】

IC693CBL311是带有 24 针 I/O 连接器的 I/O 接口电缆组件。它还包括一个 25 针型接线端子连接器。接口电缆将电源配合 APM 模块（IC693APU301 和 IC693APU302）连接到驱动器和机器。

要连接到驱动器和机器，应使用两根IC693CBL311电缆。I/O 接口电缆的排列方式与IC693CBL311电缆相同，尽管它具有排水屏蔽线，该屏蔽线未与引脚 B12 连接。I/O 电缆也通过 8“ 尾纤构建在电缆外壳的外部，该尾纤有两种长度。该IC693CBL311能够增强Power Mate APM对抗噪性的响应。 通过使用 I/O 接口电缆将模块上的每个连接器连接到接线端子，可以简化驱动器和机器的接线。

需要母（插座类型）24 针连接器才能加入 APM 面板上的 I/O 连接器。这种连接器由焊接孔眼插座组成，该插座是附件套件的一部分。附件套件包括 D 连接器、黑色外壳和触针。

GE Fanuc IC693CBL311 I/O 接口电缆是用于 GE PowerMate 安讯士定位模块的 I/O 接口电缆组件。IC693CBL311电缆属于轴定位电缆系列，有 1 米和 3 米电缆长度可供选择。IC693CBL311 I/O 接口电缆设计用于将 Power Mate 轴定位模块（如 IC693APU302 或IC693APU301模块）连接到高性能交流变频器和其他现场设备。此 I/O 电缆组件包括一个 I/O 连接器（24 针型）、一根 10 英尺（3 米）电缆、一个接线端子连接器（25 针 D 型）和一个安装表。IC693CBL311 I/O 接口电缆适用于 GE 系列 90-30 系列 IC693APU301 和 IC693APU302 轴模块，每个模块需要两根 IC693CBL311 I/O 接口电缆才能正确接线。

IC693CBL311 I/O 接口电缆的一端配有 D 型 25 针接线端子连接器，另一端配有 24 针母连接器。GE 90-30 系列的 Power Mate 轴定位模块均具有 24 针公连接器，位于每个模块的两侧，可以连接 2 根 GE 系列 90-30 IC693CBL311 I/O 接口电缆。IC693CBL311 I/O 接口电缆将 Power Mate APM 模块连接到可编程逻辑控制器或 PLC 系统中的驱动器、可编程控制器或其他现场设备。IC693CBL311 I/O 接口电缆可与 3 英尺（1 米）GE 系列 90-30 IC693CBL319 I/O 接口电缆或IC693CBL311或 IC693CBL319 I/O 接口电缆（电缆外壳外的漏极屏蔽线）互换，以满足不同的应用和安装要求。

GE IC693CBL311  I/O 接口电缆组件 APM 模块

【英文介绍】

IC693CBL311 is an I/O interface cable assembly with a 24-pin I/O connector. It also includes a 25-pin type terminal connector. Interface cables connect the power supply with the APM modules (IC693APU301 and IC693APU302) to the drive and machine.

To connect to the drive and machine, two IC693CBL311 cables should be used. The I/O interface cable is arranged in the same way as the IC693CBL311 cable, although it has a drainage shield wire that is not connected to pin B12. The I/O cable is also built on the outside of the cable housing via an 8 "pigtail, which comes in two lengths. The IC693CBL311 enhances the response of the Power Mate APM against noise. By connecting each connector on the module to the terminal using an I/O interface cable, you can simplify the wiring of drivers and machines.

A female (socket type) 24-pin connector is required to add to the I/O connector on the APM panel. This connector consists of a welded hole socket that is part of an accessory kit. Accessory kit includes D connector, black housing and stylus.

The GE Fanuc IC693CBL311 I/O interface cable is an I/O interface cable assembly for the GE PowerMate Axis positioning module. The IC693CBL311 cable belongs to the shaft positioning cable series and is available in 1 meter and 3 meter cable lengths. The IC693CBL311 I/O interface cable is designed to connect Power Mate shaft positioning modules, such as the IC693APU302 or IC693APU301 modules, to high-performance AC drives and other field devices. This I/O cable assembly includes an I/O connector (24-pin type), a 10-foot (3-meter) cable, a terminal connector (25-pin Type D), and a mounting table. IC693CBL311 I/O interface cables are applicable to GE series 90-30 series IC693APU301 and IC693APU302 axis modules. Each module requires two IC693CBL311 I/O interface cables for correct connection.

The IC693CBL311 I/O interface cable has a D-type 25-pin terminal connector at one end and a 24-pin female connector at the other end. The GE 90-30 series Power Mate shaft positioning modules have 24-pin male connectors located on either side of each module that can be connected to two GE Series 90-30 IC693CBL311 I/O interface cables. The IC693CBL311 I/O interface cable connects the Power Mate APM module to a drive, programmable controller, or other field device in a programmable logic controller or PLC system. The IC693CBL311 I/O interface cable is interchangeable with 3 ft (1 m) GE Series 90-30 IC693CBL319 I/O interface cable or IC693CBL311 or IC693CBL319 I/O interface cable (drain shielded wire outside the cable housing), To meet different application and installation requirements.

GE IC693CBL311  I/O 接口电缆组件 APM 模块

【其他型号推荐】