GE IC693CBL310 接口电缆 高密度I/O模块

【产品详情】

GE Fanuc IC693CBL310是用于 24 点模块的 I/O 32 针接口电缆。它是一种3米长的输入和输出电缆，用于高密度I/O模块，带有富士通FCN-365S024-AU 24针公头用户连接器。该电缆将模块与用户输入设备的电路连接起来。一端连接到模块上的 24 针母连接器。另一端共有 12 对的剥离、镀锡和标记端。电缆成对运送，因为两者都需要。可以使用IC693CBL310和IC693CBL327代替IC693CBL328。最好改用IC693CBL327和IC693CBL328，因为它们具有角连接器并且需要更少的连接空间。

电缆安装在模块的前面。在那里，用户可以找到两个并排连接器，每个连接器都与不同的组交互。右侧连接器与组 A 和 B 交互，左侧连接器与组 C 和 D 交互。剥线端上的标签用于识别它们将连接的正确引脚。如果GE Fanuc IC693CBL310的长度不合适，则可以创建具有相同功能的自定义电缆。请联系GE Fanuc，了解此电缆所需的富士通连接器。电缆在模块上正确连接所需的最小空间为 9.37 厘米。

GE Fanuc IC693CBL310 I/O接口电缆组装套件适用于所有GE Fanuc 90-30系列（IC693）可编程逻辑控制器（PLC）和带32针富士通连接器的24点高密度I/O模块。但是，IC693CBL310接口电缆组件套件与 90-30 系列 IC693 轴定位模块 （APM） 不兼容，不得在这些应用中使用。它以工厂组装包装的形式发货，包括两根10英尺长的I/O接口电缆、一个富士通FCN-365S024-AU 24针连接器和一个用于正确系统接线的指南表。IC693CBL310 接口电缆组件套件具有 24 针（直）连接器，两根电缆的最大电缆长度为 3 米或 120 英寸。

GE Fanuc IC693CBL310接口电缆组件套件最适合IC693模块（IC693MDL654、655、752和753）、IC61模块（IC610MDL102、152、105和310）以及带有富士通752针连接器的MDL753和MDL24模块。IC693模块需要其中2根电缆，这就是为什么组装套件附带两根IC693CBL310接口电缆作为标准选项的原因。IC693CBL310电缆的一端有 24 针母连接器，另一端有镀锡、剥皮和彩色引线。为了正确接线，用户必须将IC24CBL693 I/O电缆的310针端连接到模块上的富士通24针用户I/O连接器。IC693CBL310 I/O 接口电缆组件套件的电线代码标有 A1 至 A12 和 B1 至 B12，每对电线都用管（特别是热缩型管）绑扎，以便正确识别。

GE IC693CBL310 接口电缆 高密度I/O模块

【英文介绍】

The GE Fanuc IC693CBL310 is an I/O 32-pin interface cable for 24-point modules. It is a 3-meter input and output cable for high-density I/O modules with a Fujitsu FCN-365S024-AU 24-pin male user connector. This cable connects the module to the circuit of the user input device. One end is connected to a 24-pin female connector on the module. The other end has 12 pairs of peeling, tinning and marking ends. Cables are shipped in pairs because both are needed. IC693CBL310 and IC693CBL327 can be used instead of IC693CBL328. It is best to switch to IC693CBL327 and IC693CBL328 because they have Angle connectors and require less connection space.

The cable is installed at the front of the module. There, users can find two side-by-side connectors, each interacting with a different group. The right connector interacts with groups A and B, and the left connector interacts with groups C and D. Labels on the strip ends are used to identify the correct pins to which they will connect. If the GE Fanuc IC693CBL310 is not the right length, you can create a custom cable with the same functionality. Please contact GE Fanuc for the Fujitsu connectors required for this cable. The minimum space required for the cable to be properly connected on the module is 9.37 cm.

GE Fanuc IC693CBL310 I/O Interface Cable Assembly Kit for all GE Fanuc Series 90-30 (IC693) Programmable Logic controllers (PLCS) and 24-point high-density I/O modules with 32-pin Fujitsu connectors. However, the IC693CBL310 interface cable assembly Kit is not compatible with the 90-30 Series IC693 Axis Positioning Module (APM) and must not be used in these applications. It is shipped in a factory-assembled package that includes two 10-foot I/O interface cables, a Fujitsu FCN-365S024-AU 24-pin connector, and a guide sheet for proper system wiring. The IC693CBL310 Interface cable Assembly kit features 24-pin (straight) connectors with a maximum cable length of 3 meters or 120 inches for two cables.

GE Fanuc  The IC693CBL310 Interface cable Assembly kit is best suited for IC693 modules (IC693MDL654, 655, 752 and 753), IC61 modules (IC610MDL102, 152, 105 and 310), and MDL753 and MDL24 modules with Fujitsu 752 pin connectors. The IC693 module requires two of these cables, which is why the assembly kit comes with two IC693CBL310 interface cables as a standard option. The IC693CBL310 cable has a 24-pin female connector at one end and a tinned, peeled and colored lead at the other end. For proper wiring, the user must connect the 310 pin end of the IC24CBL693 I/O cable to the Fujitsu 24-pin user I/O connector on the module. The wire codes for the IC693CBL310 I/O Interface cable Assembly Kit are labeled A1 to A12 and B1 to B12, and each pair of wires is bundled with tubes (especially heat shrink tubes) for proper identification.

GE IC693CBL310 接口电缆 高密度I/O模块

【其他型号推荐】