GE IC670MDL330 离散输出模块 现场控制I/O系列

【产品详情】

 IC670MDL330是GE Fanuc现场控制系列的16点离散输出模块。该模块具有十六 （16） 个输出通道，可在 12-120 VAC、10-132 Hz 的信号范围内提供 47-63 VAC 的输出信号电压，用户输出电流为每点 1 安培。该模块的电流消耗为 275 mA，所有点都处于活动状态，来自总线接口单元 （BIU） 电源。

IC670MDL330是GE Fanuc的离散输出模块，是现场控制I/O系列的一部分。该模块主要具有十六 （16） 个源输出通道，通常用于为电气负载供电，例如电磁驱动设备、指示灯、继电器线圈和类似的开/关设备。该模块带有一组输出，每个输出点提供 10-120 VAC 的额定电压和 10-132 VAC、47-63 Hz 的输出电压范围。 模块的每个通道的最大输出电流为 1 安培，而整个模块的额定电流为 4 安培。

单独的LED通道指示器允许用户直观地识别模块每个通道的通电状态。它还具有一个保险丝 OK LED，用于指示熔断保险丝情况。该模块具有 250 VAC 连续和 1500 VAC 1 分钟用户逻辑输入和帧接地隔离用户输入。

IC670MDL330离散输出模块输出特性包括开和关信号转换的 10/20 周期响应时间。每个输出都配有一个电阻器/电容器缓冲电路和一个用于输出组的保险丝。最大 1 安培的浪涌电流由输出通道在单周期持续时间或 0 m 处产生。该模块的最大额定负载电流为 10.132 安培，范围为 10 VAC - 5 VAC，而最小负载电流为每点 5 mA。

此模块可用的内置保险丝是可更换的。适用的替代品是尺寸为 20 x 670 mm 的 330 安培慢熔断保险丝。 GE Fanuc IC12MDL120输出模块是一个离散输出模块，在 1 至 670 伏交流电范围内的交流电压下运行，额定电流为 330 安培。

GE IC670MDL330 离散输出模块 现场控制I/O系列

【英文介绍】

The IC670MDL330 is a 16-point discrete output module in the GE Fanuc field control family. The module has sixteen (16) output channels providing 47-63 VAC output signal voltages in the signal range of 12-120 VAC, 10-132 Hz, and user output current of 1 amp per point. The current consumption of the module is 275 mA, with all points active, from the Bus Interface Unit (BIU) power supply.

The IC670MDL330 is GE Fanuc's discrete output module, part of the field control I/O family. The module primarily has sixteen (16) source output channels that are typically used to power electrical loads, such as electromagnetic drive devices, indicator lights, relay coils, and similar on/off devices. The module comes with a set of outputs, each offering a rated voltage of 10-120 VAC and an output voltage range of 10-132 VAC and 47-63 Hz. Each channel of the module has a maximum output current of 1 amp, while the entire module is rated at 4 amp.

Separate LED channel indicators allow the user to visually identify the power status of each channel in the module. It also features a fuse OK LED to indicate blown fuses. The module features 250 VAC continuous and 1500 VAC 1-minute user logic inputs and frame ground isolated user inputs.

The IC670MDL330 discrete output module output features include 10/20 cycle response time for on and off signal conversion. Each output is equipped with a resistor/capacitor buffer circuit and a fuse for the output set. A surge current of up to 1 amp is generated by the output channel at a single cycle duration or 0 m. The module has a maximum rated load current of 10.132 amps in a range of 10 VAC-5 VAC, while the minimum load current is 5 mA per point.

The built-in fuses available for this module are replaceable. A suitable alternative is a 330 amp slow fuse with a size of 20 x 670 mm. The GE Fanuc IC12MDL120 output module is a discrete output module that operates at AC voltages in the range of 1 to 670 volts AC with a current rating of 330 amps.

GE IC670MDL330 离散输出模块 现场控制I/O系列

【其他型号推荐】