GE  IC670MDL233  具有120伏交流隔离输入

【产品详情】

 GE Fanuc的IC670MDL233隔离输入模块的额定电压为120伏交流电，频率为47至63赫兹。该装置的用户输入电流为每点 13 毫安，输入阻抗典型值为 10K。

IC670MDL233输入模块由GE Fanuc设计和生产，具有120伏交流隔离输入。该现场控制模块具有 8 个离散输入，频率为 50 至 60 赫兹。该模块需要总线接口电源，连接的输入设备由内部电源供电。该模块具有用于指示背板电源状况的“PWR”LED，并且有用于输入打开和关闭状态的专用LED指示灯。IC670MDL233输入模块的输入电压范围为 0 至 132 伏交流电，并在 10 至 20 毫秒内响应。关闭状态响应时间为 20 到 40 毫秒。IC670MDL233输入模块的典型阻抗为 10K，导通状态电流为 5 至 15 毫安。此外，该模块的关断状态电流为 0 至 2.5 毫安。

IC670MDL233输入模块的导通电压为 70 至 120 伏交流电，而关断电压为 0 至 20 伏交流电。就隔离特性而言，该装置的隔离电压为连续工作250伏交流电和1500分钟1伏交流电。由于内部部件的功能，IC670MDL233输入模块可对输入信号进行滤波。此外，该模块具有特殊的隔离器，可在模块的不同组件之间进行隔离。IC670MDL233模块的数据缓冲区包含来自所有8个输入的数据，特色电路LED指示灯显示输入状态。该模块的最大总线接口电流消耗为 40 毫安。

GE  IC670MDL233  具有120伏交流隔离输入

【英文介绍】

GE Fanuc's IC670MDL233 isolated input module has a rated voltage of 120 volts AC and a frequency of 47 to 63 Hz. The device has a user input current of 13 mA per point and a typical input impedance of 10K.

The IC670MDL233 input module is designed and produced by GE Fanuc and features a 120 volt AC isolated input. The field control module has eight discrete inputs at a frequency of 50 to 60 Hz. The module requires a bus interface power supply, and the connected input device is powered by an internal power supply. The module has a "PWR" LED for indicating the power status of the backplane, and a dedicated LED indicator for entering the on and off status. The IC670MDL233 input module has an input voltage range of 0 to 132 volts AC and responds in 10 to 20 milliseconds. Shutdown response time is 20 to 40 milliseconds. The typical impedance of the IC670MDL233 input module is 10K and the on-state current is 5 to 15 mA. In addition, the module has a turn-off current of 0 to 2.5 mA.

The IC670MDL233 input module has an on-voltage of 70 to 120 volts AC and a turn-off voltage of 0 to 20 volts AC. In terms of isolation characteristics, the isolation voltage of the device is 250 volts AC for continuous operation and 1 volt AC for 1500 minutes. The IC670MDL233 input module can filter the input signal due to the function of the internal components. In addition, the module has special isolators that allow isolation between the different components of the module. The data buffer of the IC670MDL233 module contains data from all 8 inputs, and the featured circuit LED indicator shows the input status. The maximum bus interface current consumption of this module is 40 MA.

GE  IC670MDL233  具有120伏交流隔离输入

【其他型号推荐】