GE IC695SPFO02 小型可插拔扫描仪模块

【产品详情】

GE Fanuc Automation IC695SPF002小型可插拔扫描仪模块，速度为 100 Mbps。它需要 3.3 至 5 伏的额定功率

IC695SPF002模块是一种小型可插拔扫描仪模块，由GE Fanuc Automation设计和分销，并包含在PacSystems系列中，特别是在RX3i部分。该模块由一个扫描仪模块组成，该模块将远程RX3i I/O机架连接到PROFINET控制器。此特定型号带有多模光纤连接，速度为每秒 100 至 1000 MB。该模块为 GE 90-30 系列的所有 I/O 模块提供编程和配置服务，并支持菊花链、星形或环形连接。GE Fanuc Automation IC695SPF002小型可插拔扫描器模块配有 4 个以太网端口、2 个 RJ-45 端口、8 个 2 芯，并连接 <> 个小型设备。该模块可以扫描其机架上的数据并检索输入数据，以便它可以提供输出数据。

GE Fanuc Automation IC695SPF002小型可插拔扫描器模块带有一个 USB 端口，仅用于固件升级。此端口不应永久使用。所有升级都是通过WinLoader执行的。GE Fanuc Automation IC695SPF002小型可插拔扫描仪模块支持通过使用 SD 卡将 I/O 设备名称传输到其他 PNS 模块。这样就无需在更换模块时直接连接设备。此模块可以包含不同的媒体接口，而不仅仅是单一类型。建议的最高额定温度为 60 摄氏度，如果模块要在 100 MB 下运行，则可能需要将最高工作温度降至 57 摄氏度。

GE IC695SPFO02 小型可插拔扫描仪模块

【英文介绍】

GE Fanuc Automation IC695SPF002 Small swappable scanner module at 100 Mbps. It requires a power rating of 3.3 to 5 volts

The IC695SPF002 module is a small pluggable scanner module designed and distributed by GE Fanuc Automation and included in the PacSystems family, particularly in the RX3i section. The module consists of a scanner module that connects the remote RX3i I/O rack to the PROFINET controller. This particular model comes with a multimode fiber connection at speeds of 100 to 1000 megabits per second. The module provides programming and configuration services for all I/O modules in the GE 90-30 series and supports Daisy chain, star or ring connections. GE Fanuc Automation IC695SPF002 Small pluggable scanner module is equipped with 4 Ethernet ports, 2 RJ-45 ports, 8 2-core and connected to <> small devices. The module can scan data on its rack and retrieve input data so that it can provide output data.

GE Fanuc Automation IC695SPF002 Small pluggable scanner module with a USB port for firmware upgrades only. This port should not be used permanently. All upgrades are performed through WinLoader. GE Fanuc Automation IC695SPF002 Small pluggable scanner module supports the transfer of I/O device names to other PNS modules through the use of SD cards. This eliminates the need to connect the device directly when replacing the module. This module can contain different media interfaces, not just a single type. The recommended maximum rated temperature is 60 degrees Celsius, and if the module is to operate at 100 MB, it may be necessary to reduce the maximum operating temperature to 57 degrees Celsius.

GE IC695SPFO02 小型可插拔扫描仪模块

【其他型号推荐】