GE IC695SPC100 扫描仪模块 收发器模块

【产品详情】

GE Fanuc自动化IC695SPC100 PROFINET扫描仪模块提供特殊功能。它由铜制成。

IC695SPC100模块是一个PROFINET扫描仪和收发器模块，用于RX3i PacSystems设备。该收发器为数据传输提供特殊功能，是大多数设备和机架的必要部件。该模块配有一个由铜制成的 Base-T 控制器。这种材料通常用于与像这种收发器这样的设备进行短程链路，该收发器实际上是一个可插拔部件。GE Fanuc Automation IC695SPC100 PROFINET扫描仪收发器模块尺寸小，适合需要它的BASE-TX设备，例如RX3i PacSystems控制器。该模块可在 0 至 60 摄氏度的特定温度下使用。如果在较高温度下使用并且经常过热，可能会损坏收发器。

可与GE Fanuc自动化IC695SPC100 PROFINET扫描仪收发器模块一起使用的电缆类型是最大长度为100米的双绞线电缆。此长度无法修改，因为该部件设计为插入控制器并与控制器一起使用，而不是长距离连接。GE Fanuc Automation IC695SPC100 PROFINET 扫描仪模块可与同一系列的 10、100 和 1000 Mbps 额定 base-TX 控制器配合使用。该设备支持使用 SD 卡，尤其是将信息从一个 I/O 模块传输到另一个 I/O 模块。它还带有一个USB端口，仅用于固件更新。该模块需要 3.3 至 5 伏的功率，并使用 Proficy 机器版软件。

GE IC695SPC100 扫描仪模块 收发器模块

【英文介绍】

GE Fanuc Automation IC695SPC100 PROFINET scanner module offers special features. It is made of copper.

The IC695SPC100 module is a PROFINET scanner and transceiver module for RX3i PacSystems devices. This transceiver provides special functions for data transmission and is a necessary part of most equipment and racks. The module is equipped with a Base-T controller made of copper. This material is typically used for short-range links with devices like this transceiver, which is essentially a pluggable component. The GE Fanuc Automation IC695SPC100 PROFINET scanner transceiver module is small and suitable for BASE-TX devices that require it, such as the RX3i PacSystems controller. The module can be used at specific temperatures from 0 to 60 degrees Celsius. If used at higher temperatures and often overheated, the transceiver may be damaged.

The type of cable that can be used with the GE Fanuc Automation IC695SPC100 PROFINET scanner transceiver module is a twisted pair cable with a maximum length of 100 meters. This length cannot be modified because the part is designed to be plugged into and used with the controller, not connected over long distances. The GE Fanuc Automation IC695SPC100 PROFINET scanner module can be used with the same family of 10, 100 and 1000 Mbps rated base-TX controllers. The device supports the use of SD cards, especially for transferring information from one I/O module to another. It also comes with a USB port for firmware updates only. The module requires 3.3 to 5 volts of power and uses Proficy Machine Edition software.

GE IC695SPC100 扫描仪模块 收发器模块

【其他型号推荐】