GE IC695PSA140 RX3i多用途电源 冗余配置功能

【产品详情】

GE发那科/艾默生自动化IC695PSA140是一款PACSystem RX3i多用途电源。这个电源的额定输出功率为40瓦。它的输入电源电压为85-264VAC或100-300VDC，并提供多种输出电压，如+5.1 VDC， +24 VDC继电器输出，+3.3 VDC供内部使用。该电源具有负载分担和冗余配置功能。

IC695PSA140是一款多用途电源，是PACSystem RX3i产品系列的一部分。该模块还可与具有相同IC695目录号的其他模块兼容，理想地用于冗余和负载共享应用以及背板的额外电源。

IC695PSA140能够在85-264VAC或100至300VDC的适当电源电压下提供40瓦的最大输出功率。此外，该电源模块具有三(3)个输出端口，如+5.1 VDC输出，最大30瓦;+24 VDC继电器输出，最大30瓦和+3.3 VDC输出，由具有相同IC695目录编号的RX3i模块内部使用。24VDC继电器输出也可用于激励其他电路。

单个RX3i PACSystem机架最多可安装4个多用途电源模块。具有电源、P/S故障、过温、过载等4个LED指示灯。此外，该电源模块配有过流保护。其中，5.1 VDC输出限制为7安培，3.3 VDC输出限制为10安培。该电源也支持安装在热备或冗余系统中。这样，电源的故障状态将锁存模块到OFF。为了使电源恢复正常工作，必须对电源进行循环供电。IC695PSA140还在输入线中提供了一个内部易熔连接，作为备份。

这款多用途电源的输入电压范围为100至300伏直流或85至264伏交流，输入功率为70瓦，直流电压。它还配备了满载时最大70瓦的输入功率。IC695PSA140电源的最大输出功率为40w，在直流5.1伏和直流3.3伏时最大输出功率为30w。通常，可用的最大输出功率取决于模块周围的空气温度。其他规格包括20毫秒的穿越时间，这是电源在发生电源故障时能够维持有效输出的时间。

GE IC695PSA140多用途电源非常适合冗余和负载分担应用。像这样的电源模块与IC695目录号是相互兼容的，RX3i PacSystems通用背板允许最多4个多用途电源同时连接在其上。适用于模块数量大于电源容量的情况。GE Fanuc IC695PSA140电源在通用背板中占据2个背板槽位，当有内部故障时，它可以指示，以帮助CPU检测掉电或记录正确的故障代码。

GE IC695PSA140 RX3i多用途电源 冗余配置功能

【英文介绍】

The GE Fanuc/Emerson Automation IC695PSA140 is a PACSystem RX3i multipurpose power supply. This power supply has a rated output of 40 watts. It has an input power supply voltage of 85-264VAC or 100-300VDC, and offers a variety of output voltages such as +5.1 VDC, +24 VDC relay output, and +3.3 VDC for internal use. The power supply has load balancing and redundancy functions.

The IC695PSA140 is a multipurpose power supply that is part of the PACSystem RX3i product family. The module is also compatible with other modules with the same IC695 directory number, making it ideal for redundancy and load sharing applications as well as additional power for backplanes.

The IC695PSA140 is capable of delivering a maximum output of 40 watts at an appropriate supply voltage of 85-264VAC or 100 to 300VDC. In addition, the PSU has three (3) output ports, such as +5.1 VDC output, with a maximum of 30 watts; +24 VDC relay output with a maximum of 30 watts and +3.3 VDC output, used internally by the RX3i module with the same IC695 catalog number. The 24VDC relay output can also be used to excite other circuits.

A single RX3i PACSystem rack can accommodate up to four multipurpose power modules. With power supply, P/S failure, over temperature, overload and other 4 LED indicators. In addition, the power module is equipped with overcurrent protection. Among them, 5.1 VDC output is limited to 7 amps, and 3.3 VDC output is limited to 10 amps. The power supply can also be installed in hot backup or redundant systems. In this way, the failure state of the power supply will latch the module to OFF. In order to restore the power supply to normal operation, the power supply must be cycled. The IC695PSA140 also provides an internal fusible connection in the input line as a backup.

This multipurpose power supply has an input voltage range of 100 to 300 volts DC or 85 to 264 volts AC, and an input power of 70 watts, DC voltage. It is also equipped with a maximum input power of 70 watts at full load. The IC695PSA140 power supply has a maximum output of 40w and a maximum output of 30w at 5.1 volts DC and 3.3 volts DC. Typically, the maximum output power available depends on the air temperature around the module. Other specifications include a 20-millisecond traverse time, which is the time the power supply is able to maintain an effective output in the event of a power failure.

The GE IC695PSA140 multipurpose power supply is ideal for redundancy and load sharing applications. Psus like this are compatible with the IC695 catalog number, and the RX3i PacSystems Universal backplane allows up to four multipurpose power supplies to be connected to it simultaneously. Applicable when the number of modules is greater than the power supply capacity. The GE Fanuc IC695PSA140 power supply occupies 2 backplane slots in the universal backplane, and it can indicate when there is an internal failure to help the CPU detect a power failure or record the correct fault code.

GE IC695PSA140 RX3i多用途电源 冗余配置功能

【其他型号推荐】