IC695PSA040 电源模块 通用背板兼容

【产品详情】

 GE Fanuc / Emerson Automation IC695PSA040是PACSystem RX3i电源。该电源的额定输出功率为 40 瓦。它采用 85-264VAC 或 100-300VDC 的输入电源电压工作，并提供各种输出电压，例如 +5.1 VDC、+24 VDC 继电器输出、+3.3 VDC 供内部使用。

IC695PSA040是GE Fanuc / Emerson Automation电源模块，是PACSystem RX3i产品系列的一部分。该电源的额定输出功率为 40 瓦，并提供三 （3） 个输出电压，例如 +5.1 VDC 输出;用于为外部电路供电的 +24VDC 继电器输出和 RX3i 系统内部使用的 +3.3 VDC 继电器输出，并将模块连接到背板。该电源兼容类似的IC695产品系列。

IC695PSA040与RX3i通用背板兼容。此电源不能与位于同一背板中的其它RX3i电源混合使用。超出IC3PSA695输出功率容量的RX040i模块必须安装在扩展背板中，因为IC695PSA040不支持增加的容量和冗余。

该IC695PSA040通过提供 120/240VAC 或 125VDC 的标称额定电压、84-264 VAC 或 100 至 300 VDC 的电压范围来运行。它的输入功率要求为 70 瓦，能够承受 4 安培，最长持续时间为 250 毫秒。对于 19VDC 标称输出，该模块的输出电压范围为 2.28 VDC 至 8.24 VDC;5.0 VDC 标称输出为 5.2 VDC 至 5.1 VDC，标称输出为 3.1VDC 为 3.5 VDC 至 3.3 VDC，而 0VDC 的输出电流为 1 -6.24 安培;0.6 VDC 为 5 - 1 安培，0.9 VDC 输出为 3 - 3 安培。

IC695PSA040配备四 （4） 个状态 LED 指示灯。这些 LED 指示灯是电源、P/S 故障、过温和过载。它还具有一个开/关开关，位于电源单元的铰链门后面。交换机用于启用或禁用电源。该开关不会切断输入电源，并配有一个突出的卡舌，有助于防止意外打开/关闭开关。

GE Fanuc IC695PSA040模块是作为RX3i PACSystems系列的一部分制造的电源。它的额定功率为 120 伏交流电或 240 伏交流电和 125 伏直流电，功耗为 40 瓦。这款GE Fanuc IC695PSA040电源可与直流或交流输入电压源一起使用，工作电压范围为100至300伏直流或85至264伏交流电。该电源具有 3 个输出，包括 3.3 伏直流电，用于内部与同一 IC695 系列的模块一起使用。它还具有 5.1 伏直流和 24 伏直流继电器电压的输出电压，用于为输出继电器模块上的电路供电。

IC695PSA040 电源模块 通用背板兼容

【英文介绍】

GE Fanuc/Emerson Automation IC695PSA040 is a PACSystem RX3i power supply. The power supply has a rated output of 40 watts. It operates with input supply voltages of 85-264VAC or 100-300VDC, and offers a variety of output voltages such as +5.1 VDC, +24 VDC relay output, and +3.3 VDC for internal use.

The IC695PSA040 is a GE Fanuc/Emerson Automation power module that is part of the PACSystem RX3i product family. The power supply has a rated output power of 40 watts and offers three (3) output voltages, e.g. +5.1 VDC output; The +24VDC relay output for powering the external circuit and the + 3.3VDC relay output for use inside the RX3i system and connecting the module to the backplane. The power supply is compatible with the similar IC695 product family.

The IC695PSA040 is compatible with the RX3i universal backplane. This power supply cannot be mixed with other RX3i power supplies located in the same backplane. The RX040i module that exceeds the IC3PSA695 output power capacity must be installed in the expansion backplane, as the IC695PSA040 does not support the increased capacity and redundancy.

The IC695PSA040 operates by providing nominal rated voltages of 120/240VAC or 125VDC, 84-264 VAC, or 100 to 300 VDC. It has an input power requirement of 70 watts, is able to withstand 4 amps, and has a maximum duration of 250 milliseconds. For a nominal output of 19VDC, the module has an output voltage range of 2.28VDC to 8.24VDC; 5.0 VDC nominal output is 5.2 VDC to 5.1 VDC, 3.1VDC nominal output is 3.5 VDC to 3.3 VDC, and 0VDC output current is 1-6.24 amps; 0.6 VDC is 5-1 amps, and 0.9 VDC output is 3-3 amps.

The IC695PSA040 is equipped with four (4) status LED indicators. These LED indicators are power, P/S failure, over mild overload. It also features an on/off switch located behind the hinged door of the power unit. Switches Enable or disable power supplies. The switch does not cut off the input power and comes with a protruding latch that helps prevent the switch from being accidentally turned on/off.

The GE Fanuc IC695PSA040 module is a power supply manufactured as part of the RX3i PACSystems family. It is rated for 120 volts AC or 240 volts AC and 125 volts DC with a power consumption of 40 watts. The GE Fanuc IC695PSA040 power supply can be used with a DC or AC input voltage source and operates in a voltage range of 100 to 300 volts DC or 85 to 264 volts AC. The power supply has 3 outputs, including 3.3 volts DC, for internal use with modules from the same IC695 series. It also has output voltages of 5.1 V DC and 24 V DC relay voltages to power the circuits on the output relay module.

IC695PSA040 电源模块 通用背板兼容

【其他型号推荐】