GE IC695CPE305 可编程自动化控制器 提供以太网通信功能

【产品详情】

技术规格

处理速度： 1千兆赫

中央处理器内存： 5 兆字节

浮点： 是的

电源要求： 3.3 伏直流、5 伏直流或 24 伏直流

串行协议： Modbus RTU 从机， SNP 从机， 串行 I/O

嵌入式通信： RS-232

IC695CPE305可编程自动化控制器（PAC）是PACSystems RX3i自动化平台的一部分。该控制器由当时的GE Fanuc Automation（现在的艾默生自动化）制造。

IC695CPE305具有优于当今大多数 PAC 的高级功能。该控制器通过一 （1） 个以太网通信端口提供以太网通信功能，支持 10/100 Mbps 通信速率，可用于与编程工作站、人机界面 （HMI）、监控和数据采集 （SCADA） 系统、第三方硬件和软件产品以及同一平台的控制器进行通信，用于消息传递和控制器间数据交换。此外，以太网端口支持 OPC UA，允许通过 OPC 协议连接到第三方设备。

该IC3CPE3不仅限于以太网通信，因为该控制器还集成了两 （695） 个支持 RS305 和 RS2 通信标准的串行端口。它还配备了一（232）个USB 485.1主端口，允许从智能手机的拇指驱动器下载和上传用户程序。

IC2CPE0 695MB RAM 和 305MB 非易失性用户存储器，处理器速度为 5.5 GHz，典型扫描速率为每 1 条布尔指令 1.0 毫秒。它支持各种网络协议，如以太网（PROFINET，以太网全局数据，通道，Modbus TCP服务器和客户端），Genius，PROFIBUS DP，DeviceNet。IC72CPE1000最多允许控制八 （8） 个机架，包括 CPU 机架。该控制器支持安装支持串行、Genius、CMX（反射存储器）和以太网的其他通信卡。

此单插槽控制器支持多达 695 个本地机架。

GE IC695CPE305 可编程自动化控制器 提供以太网通信功能

【英文介绍】

Technical specification

Processing speed: 1 GHZ

CPU memory: 5 megabytes

Floating point: Yes

Power requirements: 3.3 volts DC, 5 volts DC or 24 volts DC

Serial protocol: Modbus RTU slave, SNP slave, serial I/O

Embedded communication: RS-232

The IC695CPE305 Programmable Automation Controller (PAC) is part of the PACSystems RX3i automation platform. The controller was manufactured by then GE Fanuc Automation (now Emerson Automation).

The IC695CPE305 has advanced features that are superior to most PACs today. The controller provides Ethernet communication capabilities through one (1) Ethernet communication port, supports 10/100 Mbps communication rates, and can be used to communicate with programming workstations, human machine interface (HMI), monitoring and data acquisition (SCADA) systems, third-party hardware and software products, and controllers on the same platform. Used for message passing and data exchange between controllers. In addition, the Ethernet port supports OPC UA, allowing connection to third-party devices via the OPC protocol.

The IC3CPE3 is not limited to Ethernet communication, as the controller also integrates two (695) serial ports that support the RS305 and RS2 communication standards. It also comes with one (232) USB 485.1 master port that allows user programs to be downloaded and uploaded from the smartphone's thumb drive.

IC2CPE0 695MB RAM and 305MB non-volatile user memory with a processor speed of 5.5 GHz and a typical scan rate of 1.0 ms per Boolean instruction. It supports various network protocols such as Ethernet (PROFINET, Ethernet global data, channels, Modbus TCP server and client), Genius, PROFIBUS DP, DeviceNet. The IC72CPE1000 allows control of up to eight (8) racks, including CPU racks. The controller supports the installation of additional communication cards that support serial, Genius, CMX (Reflected memory), and Ethernet.

This single-slot controller supports up to 695 local racks.

GE IC695CPE305 可编程自动化控制器 提供以太网通信功能

【其他型号推荐】