GE IC695ALG808 模拟输出模块 调制设备变频驱动器

【产品详情】

技术规格

不。频道数量： 8

电压范围： 0 至 +10 V， -10 至 +10 V

电流范围： 0-20毫安， 4-20毫安

更新率： 8毫秒

输出负载： 最大 1350 欧姆

功耗： 450 毫安 @ +3.3V 直流

IC695ALG808是艾默生自动化的模拟输出模块，以前由GE智能平台（GE IP）制造。该模块配有八 （8） 个独立隔离的输出通道，可配置以提供 0-20 mA / 4-20 mA 电流信号和 +/- 10 VDC / 0-10 VDC 电压信号。

IC695ALG808可用于将输出信号传送到调制设备变频驱动器（VFD），控制阀，阻尼器，百叶窗和其他设备。它还可用于向面板仪表和数据记录器发送信号，这些仪表和数据记录仪直接表示特定变量以进行本地读数和记录。

该IC695ALG808兼容各种接线端子，如箱式 （IC694TBB032）、加长箱式 （IC694TBB132）、弹簧式 （IC694TBS032） 或加长弹簧式 （IC694TBS132）。该模块需要一个外部 24 VDC 直接端接到模块的接线端子，以使模块能够提供所需的输出信号。

IC695ALG808的所有通道均可通过软件配置。可以配置的其他参数包括报警设置，例如极低、低、高和非常高报警、模块故障报告、报警闭锁、定义报警限值以及设置高低报警限值。此外，该模块可以设置输出偏置，以正确调整输出，以实现过程所需的输出。

GE IC695ALG808 模拟输出模块 调制设备变频驱动器

【英文介绍】

Technical specification

Nooooo. Number of channels: 8

Voltage range: 0 to +10 V, -10 to +10 V

Current range: 0-20 MA, 4-20 Ma

Update rate: 8 ms

Output load: Maximum 1350 ohms

Power consumption: 450 MA @ +3.3V DC

The IC695ALG808 is an Emerson Automation analog output module formerly manufactured by GE Intelligence Platforms (GE IP). The module is equipped with eight (8) independently isolated output channels that can be configured to provide 0-20 mA / 4-20 mA current signals and +/ -10 VDC / 0-10 VDC voltage signals.

The IC695ALG808 can be used to transmit output signals to modulation devices Variable frequency drives (VFDS), control valves, dampers, shutters and other devices. It can also be used to send signals to panel meters and data loggers that directly represent specific variables for local readings and recording.

The IC695ALG808 is compatible with various terminal types, such as box type (IC694TBB032), extended box type (IC694TBB132), spring type (IC694TBS032) or extended spring type (IC694TBS132). The module requires an external 24 VDC terminal directly ended to the module to enable the module to provide the desired output signal.

All channels of IC695ALG808 can be configured by software. Additional parameters that can be configured include alarm Settings such as very low, low, high, and very high alarms, module failure reporting, alarm blocking, defining alarm limits, and setting high and low alarm limits. In addition, the module can set the output bias to adjust the output correctly to achieve the output required by the process.

When configured to provide +/- 695VDC, 808-15 mA, and 10-0 mA, the output resolution of IC20ALG4 is 20 bits, and when configured to provide a 14-0 VDC output signal, 10 bits can be achieved. In addition, it has an analog update rate of 8 milliseconds across all channels.

GE IC695ALG808 模拟输出模块 调制设备变频驱动器

【其他型号推荐】