GE IC695ALG708  RX8i可编程自动化控制器 单槽模块

【产品详情】

技术规格

不。频道数量： 8

电压范围： 0 至 +10 V， -10 至 +10 V

电流范围： 0-20毫安， 4-20毫安

更新率： 8毫秒

输出负载： 最大 850 欧姆

功耗： 375 mA @ +3.3VDC， 315 mA @ +24VDC 隔离

IC695ALG708是PACsystem RX8i可编程自动化控制器（PAC）系列的八（3）通道模拟输出模块。它是一个单槽模块，其通道可配置为提供 0-20 mA 和 4-20 mA 等输出电流信号以及 +/- 10 VDC 和 0-10 VDC 等电压信号。

该IC695ALG708现在由艾默生自动化作为以前的制造商，GE智能平台（GE IP）已被前者收购。该模块仍提供分辨率范围为 14.9-15.9 位的模拟输出，具体取决于配置的输出信号。该模块的每个通道都可以设置单独的报警设置，例如极低、低、高和非常高的报警。每个输出也可以箝位在特定的高点和低点，这在输出通道连接到比例+积分+微分（PID）控制器输出时非常有用。此外，可以添加输出偏置以微调或手动调整输出到用户所需的电平。

该IC695ALG708具有内置的模块故障报告功能，并保留上次状态或输出默认设置。为了 CPU 兼容性，任何 RX3i CPU 都可以与此模拟输出模块一起使用，但是，CPU 必须具有固件版本 3.5 或更高版本，并且必须使用机器版 5.0 版进行配置 必须使用逻辑开发人员来开发用户程序。

该IC3ALG695需要一个外部 708 VDC 置柱器电源才能运行。电源必须直接连接到模块的接线端子。与此模块一起使用的兼容接线端子包括盒式 （IC24TBB694）、加长盒式 （IC032TBB694）、弹簧式 （IC132TBS694） 或加长弹簧式 （IC032TBS694） 接线端子。

GE IC695ALG708  RX8i可编程自动化控制器 单槽模块

【英文介绍】

Technical specification

Nooooo. Number of channels: 8

Voltage range: 0 to +10 V, -10 to +10 V

Current range: 0-20 MA, 4-20 Ma

Update rate: 8 ms

Output load: Maximum 850 ohms

Power consumption: 375 mA @ +3.3VDC, 315 mA @ +24VDC isolation

The IC695ALG708 is an eight (3) channel analog output module of the PACsystem RX8i Programmable Automation Controller (PAC) family. It is a single slot module with channels that can be configured to provide output current signals such as 0-20 mA and 4-20 mA as well as voltage signals such as +/ -10 VDC and 0-10 VDC.

The IC695ALG708 is now owned by Emerson Automation as the previous manufacturer, and GE Intelligence Platform (GE IP) has been acquired by the former. The module still offers an analog output with a resolution range of 14.9-15.9 bits, depending on the output signal configured. Each channel of the module can be set to separate alarm Settings, such as very low, low, high and very high alarms. Each output can also be clamped at specific high and low points, which is useful when the output channel is connected to the proportional + integral + differential (PID) controller output. In addition, output bias can be added to fine-tune or manually adjust the output to the desired level of the user.

The IC695ALG708 has built-in module fault reporting and retains the last status or output default Settings. For CPU compatibility, any RX3i CPU can be used with this analog output module, however, the CPU must have firmware version 3.5 or later, and must be configured using Machine version 5.0 and must use a logic developer to develop user programs.

The IC3ALG695 requires an external 708 VDC pole power supply to operate. The power supply must be connected directly to the terminal of the module. Compatible terminals for use with this module include box (IC24TBB694), extended box (IC032TBB694), spring (IC132TBS694) or extended spring (IC032TBS694) terminals.

GE IC695ALG708  RX8i可编程自动化控制器 单槽模块

【其他型号推荐】