GE IC695ALG704 机架式模拟输出模块

【产品详情】

技术规格

不。频道数量： 4

电压范围： 0 至 +10 V， -10 至 +10 V

电流范围： 0-20毫安， 4-20毫安

更新率： 8毫秒

输出负载： 最大 850 欧姆

功耗： 375 mA @ +3.3VDC， 160 mA @ +24VDC 隔离

IC695ALG704是一个机架式模拟输出模块，是 PACSystem Rx3i 系列的一部分。该模块产生电压和电流输出信号，主要用于调制和控制各种现场设备，如控制阀、定位器、阻尼器和百叶窗。它还可用于修复信号分路器、隔离器、数据记录器、面板仪表和单回路控制器的终端信号。

该IC695ALG704配有四 （4） 个非隔离输出通道，可配置为 +/-10 VDC、0-10 VDC 和 0-20 mA 以及 4-20 mA 输出信号，14 至 9V 的特定分辨率为 0.10 位;15.9 位，用于 +/- 10 VDC;15-9 mA时为0.20位，15-6 mA时为4.20位。对于本模块的信号线端接，兼容的接线端子包括目录号为 IC694TBB032 的盒式接线端子、目录号 IC694TBB132 的加长接线盒式、部件号 IC694TBS032 的弹簧式接线端子或部件号 IC694TBS132 的加长弹簧型接线端子。扩展的接线端子为模块的屏蔽线端接提供了额外的深度和空间。

IC695ALG704具有通道输出数据格式，可在 32 位字段中配置为浮点 IEEE 16 位或 32 位整数。每个输出容器的更新速率为8毫秒，并配有-30V（持续60秒）和+30V（持续一小时）的单独过压保护。此模块使用 RX3i CPU 3.0 或更高版本运行，并使用机器版 5.0 SP3 逻辑开发人员 - PLC 进行编程。它是一个单插槽模块，可安装到通用 RX3i 背板上。

GE IC695ALG704 机架式模拟输出模块

【英文介绍】

Technical specification

Nooooo. Number of channels: 4

Voltage range: 0 to +10 V, -10 to +10 V

Current range: 0-20 MA, 4-20 Ma

Update rate: 8 ms

Output load: Maximum 850 ohms

Power consumption: 375 mA @ +3.3VDC, 160 mA @ +24VDC isolation

The IC695ALG704 is a rack-mounted analog output module that is part of the PACSystem Rx3i family. The module generates voltage and current output signals and is primarily used to modulate and control various field devices such as control valves, positioners, dampers and shutters. It can also be used to repair terminal signals in signal splitters, isolators, data loggers, panel meters and single-loop controllers.

The IC695ALG704 is equipped with four (4) non-isolated output channels that can be configured for +/-10 VDC, 0-10 VDC and 0-20 mA, and 4-20 mA output signals with a specific resolution of 0.10 bits from 14 to 9V; 15.9-bit, for +/ -10 VDC; It is 0.20 bits at 15-9 mA and 4.20 bits at 15-6 mA. For the signal wire termination of this module, Compatible terminals include box terminals with IC694TBB032, extended box terminals with IC694TBB132, spring terminals with part IC694TBS032, or extended spring terminals with part IC694TBS132. The extended terminals provide additional depth and space for the shielded wire terminations of the module.

IC695ALG704 has a channel output data format that can be configured in a 32-bit field as a floating point IEEE 16-bit or 32-bit integer. Each output container has an update rate of 8 ms and is equipped with individual overvoltage protection of -30V (lasting 60 seconds) and +30V (lasting one hour). This module runs with RX3i CPU version 3.0 or later and is programmed with machine version 5.0 SP3 logic developer-PLC. It is a single slot module that can be mounted onto a universal RX3i backplane.

GE IC695ALG704 机架式模拟输出模块

【其他型号推荐】