GE IC695ALG626 带HART通信的模拟输入

【产品详情】

技术规格

模块类型： 带HART通信的模拟输入

输入数量： 16 个单端或 8 个差分

内部电源： 3.3V： 600mA;5V： 450 mA

插槽数量： 1（单插槽）

电流范围： 0-20毫安， 4-20毫安， +/-20毫安

电压范围： +/-10V， 0-10V， +/-5V， 0-5V，1-5V

IC695ALG626是来自PACSystem RX5i平台的高速可寻址远程传感器（HART）0.3模拟输入模块。该模块以前由GE智能平台（GE IP）制造，该平台最近被艾默生自动化收购。该模块主要用于与模拟现场仪表接口，测量过程变量并将测量值传输到接收元件（如IC695ALG626）进行处理。因此，IC695ALG626可以与提供 0 至 20mA、4 至 20mA、± 20mA 电流信号和 ±10V、0 至 10V、±5V、0 至 5V、1 至 5V 电压信号的现场仪表一起使用。

如果配置为单端输入，IC695ALG626能够提供十六 （16） 个输入通道，并为差分接线配置八 （8） 个输入。由于支持HART协议，每个通道都可以与外部HART通信器通信，不仅可以访问读数，还可以访问其他HART参数。

IC695ALG626带有 LED 状态指示灯，例如模块正常、现场状态和 TB LED。模块 OK LED 用于在 LED 呈稳定绿色亮起时指示正确配置的模块;如果缓慢闪烁绿色或琥珀色，则出错;快速闪烁时模块配置不正确;模块指示灯熄灭时通电有缺陷或没有通电。现场状态 LED 呈绿色常亮，表示已启用的通道和接线端子存在时没有故障;黄灯表示模块通道处于故障状态，熄灭 LED 表示接线端子断开或安装不正确。接线端子未连接时，TB 指示灯呈红色亮起;连接接线端子时亮起绿色，如果没有底板电源，则熄灭。

GE IC695ALG626 带HART通信的模拟输入

【英文介绍】

Technical specification

Module type: Analog input with HART communication

Number of inputs: 16 single-ended or 8 differential

Internal power supply: 3.3V: 600mA; 5V: 450 mA

Number of slots: 1 (single slot)

Current range: 0-20 MA, 4-20 MA, +/-20 Ma

Voltage range: +/-10V, 0-10V, +/-5V, 0-5V, 1-5V

The IC695ALG626 is a high-speed addressable Remote Sensor (HART) 0.3 analog input module from the PACSystem RX5i platform. The module was previously manufactured by GE Intelligence Platform (GE IP), which was recently acquired by Emerson Automation. The module is primarily used to interface with analog field instruments, measure process variables and transmit the measured values to a receiving element (e.g. IC695ALG626) for processing. As a result, the IC695ALG626 can be used with field meters that provide 0 to 20mA, 4 to 20mA, ± 20mA current signals and voltage signals of ±10V, 0 to 10V, ±5V, 0 to 5V, 1 to 5V.

If configured as a single-ended input, the IC695ALG626 is capable of providing sixteen (16) input channels and eight (8) inputs for differential wiring. Thanks to support for the HART protocol, each channel can communicate with an external HART communicator to access not only readings, but also other HART parameters.

The IC695ALG626 has LED status indicators such as module Normal, Field Status and TB LED. Module OK LED A module that indicates the correct configuration when the LED lights up steadily green; If it slowly blinks green or amber, an error occurs; The module configuration is incorrect when fast blinking occurs. When the module indicator is off, the power is faulty or not powered on. The field status LED is steady green, indicating that there is no fault when the enabled channel and terminal exist; A yellow light indicates that the module channel is faulty, and an off LED indicates that the terminal is disconnected or incorrectly installed. If the wiring terminal is not connected, the TB indicator is on red. When connecting the terminal, the light is green. If there is no baseboard power supply, the light is off.

GE IC695ALG626 带HART通信的模拟输入

【其他型号推荐】