GE lC695ALG412 热电偶输入模块 差分热电偶输入通道

【产品详情】

产品描述

该IC695ALG412是GE Fanuc RX12i系列的3通道热电偶输入模块，该模块提供12个隔离的差分热电偶输入通道。在IC695ALG412的网站页面上查看本机的规格。

技术规格

模块类型： 隔离式热电偶输入

输入数量： 12

内部电源： 3.3V： 400mA;5V： 425 毫安

插槽数量： 1（单插槽）

类型： J、K、T、E、R、S、B、N 或 C

更新率： 15 毫秒至 120 毫秒（可配置）

IC695ALG412热电偶输入模块属于GE Fanuc RX3i PACSystems系列I/O模块。它带有12个隔离的差分热电偶输入通道。即使应用系统电源，它也支持热拔出和插入。IC695ALG412热电偶输入模块带有LED状态指示灯，用于状态报告和模块识别。该模块的分辨率范围为 11.5 至 16 位。其先进的诊断功能向控制器用户报告高低警报、开路和超/欠量程情况。通道的输入可以配置为各种热电偶类型，例如 K、T、E、R、S、B、N 和 C 型。

IC695ALG412热电偶输入模块使用24伏直流隔离电源的外部电源作为模块的电源。其RX3i通用背板左侧有一个TB1连接器，用于连接外部电源。该模块与任何类型的端子组件兼容，包括盒式、扩展盒式、弹簧式和扩展弹簧式组件。它是完全软件可配置的，不需要任何跳线进行配置。IC695ALG412热电偶输入模块的一些主要功能包括温度单元可选性、可编程陷波滤波器、用户缩放、欠量程/超量程报警检测和接线端子检测开关。它提供可现场升级的固件。模块的分辨率取决于滤波器和输入类型。它具有简单的接线连接，无需屏蔽端子。使用此热电偶输入模块时，建议使用CJC传感器。CJC传感器必须插入接线端子触点，同时保持端子和热敏电阻之间的金属对金属接触。

GE lC695ALG412 热电偶输入模块 差分热电偶输入通道

【英文介绍】

Product description

The IC695ALG412 is a 3-channel thermocouple input module in the GE Fanuc RX12i series, which provides 12 isolated differential thermocouple input channels. Check the specifications of the unit on the IC695ALG412 website page.

Technical specification

Module type: Isolated thermocouple input

Input quantity: 12

Internal power supply: 3.3V: 400mA; 5V: 425 mah

Number of slots: 1 (single slot)

Type: J, K, T, E, R, S, B, N, or C

Update rate: 15 ms to 120 ms (configurable)

The IC695ALG412 thermocouple input module belongs to the GE Fanuc RX3i PACSystems series I/O module. It comes with 12 isolated differential thermocouple input channels. It supports hot pull out and plug in even when system power is applied. IC695ALG412 thermocouple input module with LED status indicator for status reporting and module identification. The module has a resolution range of 11.5 to 16 bits. Its advanced diagnostics function reports high and low alarms, open and over/under ranges to the controller user. The input of the channel can be configured to various thermocouple types, such as K, T, E, R, S, B, N, and C types.

The IC695ALG412 thermocouple input module uses the external power supply of the 24 volt DC isolation power supply as the power supply of the module. Its RX3i universal backplane has a TB1 connector on the left side for connecting to an external power supply. The module is compatible with any type of terminal assembly, including box, expansion box, spring and expansion spring assemblies. It is fully software configurable and does not require any jumpers for configuration. Some of the key features of the IC695ALG412 thermocouple input module include temperature unit selectable, programmable notch filter, user scaling, underrange/overrange alarm detection, and terminal detection switch. It offers firmware that can be upgraded on site. The resolution of the module depends on the filter and input type. It has a simple wiring connection without shielding terminals. When using this thermocouple input module, the CJC sensor is recommended. The CJC sensor must be inserted into the terminal contact while maintaining metal-to-metal contact between the terminal and the thermistor.

GE lC695ALG412 热电偶输入模块 差分热电偶输入通道

【其他型号推荐】