GE IC695ACC403 能量包 智能平台设备

【产品详情】

一个 24V 直流、72W SELV 电源

带 18 AWG （0.82mm2） 铜线的电源线

用于框架接地的 18 AWG （0.82mm2） 铜线

输入电源接线端子 - 提供

一把小平头螺丝刀

IC695ACC403能量包是GE Fanuc制造的能源包。它与GE RX3i PacSystem模块兼容。它是一种智能平台设备，设计用于在 I 类 2 级额定环境中运行。它已被列入cULus和CE标准。能量组以 24 伏直流电压运行，需要 72 瓦 SELV 电源。通过使用 18 AWG 铜线进行框架接地来连接到能量组。IC695ACC403能量包与控制器配合使用，在断电和波动的情况下节省用户内存。它使用非易失性RAM来存储其内容。当电源恢复时，可以轻松地从RAM恢复信息。在安装过程中，能量组应良好接地，接地线在接地点必须尽可能短。

GE Fanuc IC695ACC403能量组配备了一个 LED 灯，在初始通电过程中会亮起。能量组具有自动运行的主动诊断功能，当能量组通过诊断测试时，输出电源 LED 亮起。当IC695ACC403能量包开始充电时，“STAT”LED 开始闪烁。能量包的固件由控制器自动更新。固件通常在能量包的启动过程中进行检查。IC695ACC403能量单元可以使用DIN导轨安装底座轻松安装。能量包采用开放式架构设计，应防止水溅，防止损坏。还应远离热源。

GE IC695ACC403 能量包 智能平台设备

【英文介绍】

A 24V DC, 72W SELV power supply

Power cable with 18 AWG (0.82mm2) copper wire

18 AWG (0.82mm2) copper wire for frame grounding

Input power terminal - Provided

A small flat-head screwdriver

The IC695ACC403 Energy pack is an energy pack manufactured by GE Fanuc. It is compatible with GE RX3i PacSystem modules. It is an intelligent platform device designed to operate in a Class I Level 2 rated environment. It has been listed in cULus and CE standards. The power pack operates at 24 volts DC and requires 72 watts of SELV power. Connect to the energy group by grounding the frame using 18 AWG copper wire. The IC695ACC403 power pack is used in conjunction with the controller to save user memory in case of power outages and fluctuations. It uses non-volatile RAM to store its contents. When power is restored, information can be easily recovered from RAM. During the installation, the energy group should be well grounded, and the ground cable must be as short as possible at the ground point.

The GE Fanuc IC695ACC403 power pack is equipped with an LED light that lights up during the initial power-on process. The energy group has an active diagnostic function that runs automatically, and when the energy group passes the diagnostic test, the output power LED lights up. When the IC695ACC403 power pack starts charging, the "STAT" LED starts flashing. The firmware of the power pack is automatically updated by the controller. The firmware is usually checked during the boot of the power pack. The IC695ACC403 energy unit can be easily installed using a DIN rail mounting base. The energy pack has an open architecture design, which should prevent water splashing and prevent damage. Keep away from heat.

GE IC695ACC403 能量包 智能平台设备

【其他型号推荐】