GE IC694TBS132 接线端子 RX3i中端控制器设备

【产品详情】

IC694TBS132接线端子是GE Fanuc的接线端子，可与RX3i PacSystem中的GE RX3i中端控制器设备一起使用。PacSystem 带有用于分布式 I/O 的集成 PROFINET 网络。接线端子具有延长的弹簧，与IC694TBB132接线端子相同。它是GE工业自动化产品线的一部分。接线端子的外壳比其他接线端子盖深约 3 毫米。该接线端子可轻松容纳比规格在 13 至 14 AWG 之间的平均水平更大的电线。块中线条的总长度为 28.0 英寸。该模块中的 310 个端子用于模块的现场接线。

IC694TBS132接线端子采用开放式外壳设计，应始终防止喷水。模块的前部有一个端子门，用于保护连接。在安装接线端子组件期间，应完全断开现场电源。目录号标签应与模块一起安装在接线端子顶部。在安装过程中，应完成模块接线并固定线束。IC694TBS132接线端子易于安装和使用。接线端子的安装只需对齐并按下，直到卡入到位即可。然后可以按下接线端子前面的闩锁，直到端子块到达插槽顶部。接线端子小巧紧凑，非常适合小型面板空间。

GE IC694TBS132 接线端子 RX3i中端控制器设备

【英文介绍】

The IC694TBS132 terminal is a GE Fanuc terminal that can be used with GE RX3i mid-range controller devices in the RX3i PacSystem. The PacSystem comes with an integrated PROFINET network for distributed I/O. The terminal has an extended spring, the same as the IC694TBB132 terminal. It is part of GE's industrial automation product line. The housing of the terminal is about 3 mm deeper than the other terminal covers. The terminals can easily accommodate larger wires than the average specification between 13 and 14 AWG. The total length of the lines in the block is 28.0 inches. The 310 terminals in the module are used for field wiring of the module.

The IC694TBS132 terminals have an open housing design and should always be protected from water spray. The front of the module has a terminal door to protect the connection. During the installation of the terminal assembly, the onsite power supply should be completely disconnected. The directory number label should be mounted on top of the terminal with the module. During the installation, connect cables to the module and secure cable harnesses. IC694TBS132 terminals are easy to install and use. The installation of the terminal is simply aligned and pressed until it snaps into place. You can then press the latch in front of the terminal until the terminal block reaches the top of the slot. Small and compact terminals are ideal for small panel Spaces.

GE IC694TBS132 接线端子 RX3i中端控制器设备

【其他型号推荐】