GE IC694MDR390 混合 I/O 模块 继电器输出

【产品详情】

GE Fanuc IC694MDR390 I/O 模块是用于 RX3i PacSystems PLC 系统的混合 I/O 模块。该模块具有 8 个独立隔离的灌电流/拉电流输入，带有一个公共端子和 8 个独立隔离的 NO（常开）继电器输出，分为 2 组，每组 4 个输出点。IC694MDR390 I/O 模块的输入可以是正的，也可以是负的，因为它们向连接的输入设备灌入或提供电流到公共器件。IC694MDR390 I/O 模块的输入单元还兼容各种工业输入设备，包括限位开关、电子开关和按钮。每个 IC694MDR390 I/O 模块 NO 继电器输出电路的开关容量为 2.0 安培，并且都与螺线管、指示器和电机启动器等各种现场输出设备兼容。

IC694MDR390 I/O 模块的标称输入额定值为 24.0 伏直流，输入之间的隔离额定值为 500 伏交流电 （RMS）。它的标称输入电流额定值为 7.5 毫安，最大输入响应时间为 7.5 毫秒（开/关）。IC694MDR390 I/O 模块的额定输出电压范围为 5 至 30 伏直流或 5 至 250 伏交流电（50 至 60 赫兹），每个输出点之间具有 500 伏交流电 （RMS） 隔离。每个 IC694MDR390 I/O 模块的输出电路的最小可能负载为 10.0 毫安，最大负载为 2.0 安培。输出的最大浪涌电流额定值为 5.0 A，最大开/关响应时间为 15 毫秒。IC694MDR390 I/O 模块可安装在任何 RX3i PacSystems PLC I/O 插槽中，不支持热插入或热拔出。IC694MDR390 I/O 模块具有 16 个前面板 LED，可显示每个 I/O 点的开和关状态。

GE IC694MDR390 混合 I/O 模块 继电器输出

【英文介绍】

The GE Fanuc IC694MDR390 I/O module is a hybrid I/O module for RX3i PacSystems PLC systems. The module has 8 independently isolated feed/pull current inputs with a common terminal and 8 independently isolated NO (normally on) relay outputs, divided into 2 groups of 4 output points each. The inputs to the IC694MDR390 I/O module can be either positive or negative, as they inject or provide current to the connected input devices to the common device. The input unit of the IC694MDR390 I/O module is also compatible with a wide range of industrial input devices, including limit switches, electronic switches and buttons. Each IC694MDR390 I/O module NO relay output circuit has a switching capacity of 2.0 amps and is compatible with a wide range of field output devices such as solenids, indicators and motor starters.

The IC694MDR390 I/O module has a nominal input rating of 24.0 volts DC and an isolation rating of 500 volts AC (RMS) between inputs. It has a nominal input current rating of 7.5 MA and a maximum input response time of 7.5 ms on/off. The IC694MDR390 I/O module has a rated output voltage range of 5 to 30 volts DC or 5 to 250 volts AC (50 to 60 Hz), with 500 volts alternating current (RMS) isolation between each output point. The output circuit of each IC694MDR390 I/O module has a minimum possible load of 10.0 mA and a maximum load of 2.0 amps. The output has a maximum surge current rating of 5.0A and a maximum on/off response time of 15 milliseconds. The IC694MDR390 I/O module can be installed in any RX3i PacSystems PLC I/O slot and does not support hot insertion or hot removal. The IC694MDR390 I/O module features 16 front panel leds that show the on and off status of each I/O point.

GE IC694MDR390 混合 I/O 模块 继电器输出

【其他型号推荐】