GE IC694MDL758 正逻辑离散输出模块

【产品详情】

技术规格

额定电压： 12 至 24 伏直流电

# 输出数量： 32 （2 组，每组 16 人）

频率： 不适用

输出电流： 每点0.5A，每组8A

输出电压范围： 10.2 至 28.8 VDC

功耗： 250mA （来自 5V 总线）

 GE Fanuc IC694MDL758离散输出模块是用于RX3i PacSystems PLC系统的正逻辑离散输出模块。该模块提供外部输出设备和RX3i控制器之间的输出信号接口。IC694MDL758 输出模块提供 32 个离散输出，分为 2 个独立的组，每个组 16 个输出。每个通用组都有一个集成的“故障恢复”短路保护，其工作原理是生成组内的ESCP故障报告并将其中继到RX3i CPU。当组内发生现场侧电源损失时，IC694MDL758输出模块还会向CPU发送故障报告。IC694MDL758输出模块可以提供正逻辑或源电流型输出，能够在 12 至 24 伏直流范围内切换用户负载负载，并且还可以提供每点高达 0.5 安培的电流。

IC694MDL758输出模块的额定电压为 12/24 伏直流（正逻辑），输出电压范围为 10.2 至 28.8 伏直流。它还具有每点 0.5 安培的额定输出电流和 8.0 安培的总组额定电流。IC694MDL758输出模块在 250.5 伏直流电时的背板额定值为 0 毫安，浪涌电流额定值为 5.4 安培，持续 10 毫秒（无 ESCP 跳闸）。IC694MDL758输出模块支持IC694TBB032等箱式接线端子或IC694TBS032等弹簧式接线端子，并配有 32 个显示单个输出通道状态更新的绿色 LED、2 个显示故障状态更新的 LED 和一个显示模块状态的绿色 LED。IC694MDL758输出模块仅与 RX3i CPU（不兼容 90-30 系列 CPU）兼容，并且可以安装在 RX3i PLC 系统的 I/O 插槽中。

GE IC694MDL758 正逻辑离散输出模块

【英文介绍】

Technical specification

Rated voltage: 12 to 24 volts DC

# Output quantity: 32 (2 groups, 16 people per group)

Frequency: Not applicable

Output current: 0.5A per point, 8A per group

Output voltage range: 10.2 to 28.8 VDC

Power consumption: 250mA (from 5V bus)

GE Fanuc IC694MDL758 discrete output module is a positive logic discrete output module for RX3i PacSystems PLC system. This module provides an output signal interface between the external output device and the RX3i controller. The IC694MDL758 output module provides 32 discrete outputs divided into 2 independent groups of 16 outputs each. Each common group has an integrated "failback" short-circuit protection that works by generating ESCP fault reports within the group and relending them to the RX3i CPU. The IC694MDL758 output module also sends a fault report to the CPU when a field power loss occurs in the group. The IC694MDL758 output module can provide positive logic or source current type outputs, capable of switching user load loads in the 12 to 24 volt DC range, and can also deliver up to 0.5 amps of current per point.

The IC694MDL758 output module is rated at 12/24 volts DC (positive logic) with an output voltage range of 10.2 to 28.8 volts DC. It also has a rated output current of 0.5 amps per point and a total group current rating of 8.0 amps. The IC694MDL758 output module has a backplane rating of 0 mA at 250.5 VDC and a surge current rating of 5.4 amps for 10 milliseconds (no ESCP trip). The IC694MDL758 output module supports box terminals such as IC694TBB032 or spring terminals such as IC694TBS032, and is equipped with 32 green leds to display status updates for individual output channels, 2 leds to display fault status updates, and one green LED to display module status. The IC694MDL758 output module is only compatible with the RX3i CPU (not compatible with the 90-30 series CPU) and can be installed in the I/O slot of the RX3i PLC system.

GE IC694MDL758 正逻辑离散输出模块

【其他型号推荐】