IC694MDL753 可编程自动化控制器 支持正逻辑接线配置

【产品详情】

技术规格

额定电压： 12 至 24 伏直流电

# 输出数量： 32 （4 组，每组 8 人）

频率： 不适用

输出电流： 每点 0.5 A，每组 4 A

输出电压范围： 10.2 至 28.8V 直流

功耗： 260mA 5V 总线

 该IC694MDL753是一个离散输入模块，是PACSystem RX3i可编程自动化控制器（PAC）系列的一部分，该系列以前由GE智能平台制造，最近被艾默生自动化收购。该模块是一个高密度数字输出模块，具有三十二 （32） 个输出通道，分为四 （4） 个，每组八 （8） 个通道。

该模块的每个通道产生 10.2-28.8 VDC 的输出电压范围，标称值为 12 / 24 VDC。仅支持正逻辑接线配置，其中，正极线从输出通道连接到所连接负载的正极端子。每个通道产生 0.5 安培的输出电流，每组最大电流为 4 安培，每组公共引脚 3 安培。每个通道产生 5.4 安培的浪涌电流，持续 10 毫秒，导通态压降为 0.3 VDC，关态漏电流为 0.1 安培。每个通道的响应时间为 0.5 ms

该模块配有 32 个单独的状态 LED，指示每个输出通道的通电状态。为了建立模块连接，该模块配有嵌入式引脚，兼容两个24针公连接器（Fujitsu FCN–365P024–AU）。用户构建的电缆也可用于灵活性，或者使用目录号IC694CBL327和IC694CBL328的预接线电缆。

IC694MDL753占用机箱的单个插槽，可以安装到任何可用插槽，无论是在本地还是远程 I/O 机架中。当 CPU 转换到 STOP 模式时，模块的所有输出都会通电。

IC694MDL753 可编程自动化控制器 支持正逻辑接线配置

【英文介绍】

Technical specification

Rated voltage: 12 to 24 volts DC

# Output quantity: 32 (4 groups, 8 people per group)

Frequency: Not applicable

Output current: 0.5A per point, 4A per group

Output voltage range: 10.2 to 28.8V DC

Power consumption: 260mA 5V bus

The IC694MDL753 is a discrete input module that is part of the PACSystem RX3i Programmable Automation Controller (PAC) family, previously manufactured by GE Intelligent Platforms and recently acquired by Emerson Automation. The module is a high density digital output module with thirty-two (32) output channels, divided into four (4), each group of eight (8) channels.

Each channel of the module produces an output voltage range of 10.2-28.8 VDC, with a nominal value of 12/24 VDC. Only the positive logical connection configuration is supported, where the positive wire is connected from the output channel to the positive terminal of the connected load. Each channel produces an output current of 0.5 amps, with a maximum current of 4 amps per group and 3 amps per group of common pins. Each channel generates a surge current of 5.4 amps for 10 milliseconds, with a voltage drop of 0.3 VDC in the on-state and a leakage current of 0.1 amps in the off state. The response time for each channel is 0.5 ms

The module is equipped with 32 individual status leds that indicate the power status of each output channel. In order to establish module connections, the module is equipped with embedded pins and compatible with two 24-pin male connectors (Fujitsu FCN-365P024-AU). User-built cables are also available for flexibility, or pre-wired cables with catalog numbers IC694CBL327 and IC694CBL328.

The IC694MDL753 occupies a single slot in the chassis and can be installed into any available slot, either in a local or remote I/O rack. When the CPU switches to STOP mode, all the output of the module is powered on.

IC694MDL753 可编程自动化控制器 支持正逻辑接线配置

【其他型号推荐】