GE IC694MDL734 正负逻辑输出模块  配有 6 个隔离输出

【产品详情】

技术规格

额定电压： 125 伏直流电

# 输出数量： 6（隔离）

频率： 不适用

输出电流： 每点 1 A

输出电压范围： +10.8 至 +150 VDC

功耗： 90 mA （5V 总线）

IC694MDL734是一个正负逻辑输出模块，专门用于GE发那科自动化制造的RX3i PLC系统的不同设备。该模块为用户提供了连接最佳操作过程所需的不同类型输出设备的选项，并满足所有应用要求。GE Fanuc Automation IC694MDL734正负逻辑输出模块配有 6 个隔离输出，可在 10.8 至 150 伏直流的特定电压范围内工作，额定电流为每点 1 安培。每个输出都由一个LED支撑，该LED与各个输出状态挂钩，以便监控器可以快速轻松地检查每个输出的功能。

GE Fanuc自动化IC694MDL734正负逻辑输出模块可以通过简单的机制插入RX3i系统机架的任何插槽中，但还必须与模块所需的所有设备进行多个连接，因此经验丰富的技术人员应处理安装过程。GE Fanuc自动化IC694MDL734正负逻辑输出模块提供从背板到框架接地的隔离，框架接地的额定电压为250伏交流电连续电压和最大1500伏交流电。点对点隔离由 250 伏交流连续电压组成，每 1500 分钟最高可达 1 伏交流电。该模块的额定功耗为 90 毫安，根据背板上的 5 伏直流母线计算得出。消极和积极的逻辑使其能够在不同的应用中运行。

GE IC694MDL734 正负逻辑输出模块  配有 6 个隔离输出

【英文介绍】

Technical specification

Rated voltage: 125 volts DC

# Number of outputs: 6 (isolated)

Frequency: Not applicable

Output current: 1 A per point

Output voltage range: +10.8 to +150 VDC

Power consumption: 90 mA (5V bus)

The IC694MDL734 is a positive and negative logic output module specifically designed for different devices in the RX3i PLC system manufactured by GE Fanuc Automation. The module provides the user with the option to connect the different types of output devices required for the optimal operation process and meets all application requirements. The GE Fanuc Automation IC694MDL734 positive and negative logic output module is equipped with 6 isolated outputs to operate in a specified voltage range from 10.8 to 150 volts DC with a current rating of 1 amp per point. Each output is supported by an LED that is hooked to individual output states so that the monitor can quickly and easily check the functionality of each output.

The GE Fanuc Automation IC694MDL734 positive and negative logic output module can be inserted into any slot in the RX3i system rack by a simple mechanism, but there must also be multiple connections with all the equipment required by the module, so an experienced technician should handle the installation process. The GE Fanuc Automation IC694MDL734 Positive and negative logic output module provides isolation from the backplane to the frame ground, which is rated for 250 V AC continuous voltage and up to 1500 V AC. Point-to-point isolation consists of 250 volts AC continuous voltage, up to 1 volt AC every 1500 minutes. The module's power consumption rating is 90 MA, calculated from the 5-volt DC bus on the backplane. Negative and positive logic enables it to work in different applications.

GE IC694MDL734 正负逻辑输出模块  配有 6 个隔离输出

【其他型号推荐】