GE IC694MDL660 可编程自动化控制器 

【产品详情】

技术规格

额定电压： 24 伏直流电

# 输入数： 32 （4 组，每组 8 人）

频率： 不适用

输入电流： 7毫安

输入电压范围： 0 至 +30V 直流

功耗： 330 mA（5V 总线）

IC694MDL660该模块是 PACSystem RX3i 可编程自动化控制器 （PAC） 系列的组件模块，该模块最初由 GE Intelligent Platform 生产，目前隶属于艾默生自动化。该模块是一个高密度的三十二 （32） 点输入通道，专门具有组隔离，四 （4） 个输入组，每个输入组八 （8） 个通道。该IC694MDL660设计用于接受 0-30 VDC 的输入信号电压，标称输入为 24 VDC，额定电压下每点的输入电流为 7.0 mA。该模块的每个通道的导通电压范围为 11.5-30 VDC，而关态电压为 0-5 VDC。最大导通电流为3.2 mA，最大关断电流为1.1 mA。还可以选择可配置的滤波时间，以便微调每个输入通道。可选输入滤波器（如 0.5ms、1.0ms、2.0ms、5ms、10ms、50ms 和 100ms）使模块能够忽略通常由环境和机械因素（如灰尘和去抖动）引起的假阴性和假阳性检测。所选过滤器设置将成为输入点的开和关响应时间。该模块需要使用高密度接线端子，特别是箱形接线端子，目录号为IC694TBB032或弹簧式接线端子，目录号IC694TBS032前接线端子。每个输入通道都有专用的输入 LED 指示灯，用于描述器件的逻辑状态。当 LED 亮起时，描绘了逻辑 1，表示输入通道正在主动接收输入电流，否则，LED 处于非活动状态。

IC694MDL660输入模块是由GE Fanuc Automation制造的逻辑输入模块，包含在RX3i PACSystem系列中。它适用于 RX3i 机架。该模块带有 32 个输入，可在正逻辑或负逻辑下工作。这些输入分为不同的组，每个输入都可以在 30 伏的最大电压下运行。4 组输入各有其公共连接。这些组之间的隔离电压额定值高达 250 伏交流电连续，最高可达 1500 伏交流电，持续 1 分钟。GE Fanuc自动化IC694MDL660逻辑输入模块具有24伏直流电压，每个输入的输入电压范围为0至30伏直流电。

GE IC694MDL660 可编程自动化控制器 

【英文介绍】

Technical specification

Rated voltage: 24 volts DC

# Number of inputs: 32 (4 groups, 8 people each)

Frequency: Not applicable

Input current: 7 MA

Input voltage range: 0 to +30V DC

Power consumption: 330 mA (5V bus)

IC694MDL660 The module is a component module of the PACSystem RX3i Programmable Automation Controller (PAC) family, originally produced by GE Intelligent Platform and now owned by Emerson Automation. The module is a high density thirty-two (32) point input channel specially equipped with group isolation, four (4) input groups, each with eight (8) channels. The IC694MDL660 is designed to accept input signal voltages of 0-30 VDC with a nominal input of 24 VDC and an input current of 7.0 mA per point at rated voltage. Each channel of the module has an on-voltage range of 11.5-30 VDC and an off voltage of 0-5 VDC. The maximum conduction current is 3.2mA and the maximum turn-off current is 1.1mA. Configurable filtering times can also be selected to fine-tune each input channel. Optional input filters (such as 0.5ms, 1.0ms, 2.0ms, 5ms, 10ms, 50ms and 100ms) enable the module to ignore false negative and false positive tests that are usually caused by environmental and mechanical factors such as dust and dejitter. The selected filter Settings will become the on and off response times for the input points. The module requires high-density terminals, especially box terminals with IC694TBB032 or spring terminals with IC694TBS032 front terminals. Each input channel has a dedicated input LED indicator that describes the logical state of the device. When the LED lights up, logic 1 is depicted, indicating that the input channel is actively receiving the input current, otherwise, the LED is inactive.

The IC694MDL660 input module is a logic input module manufactured by GE Fanuc Automation and included in the RX3i PACSystem family. It is suitable for RX3i racks. The module comes with 32 inputs and works with either positive or negative logic. These inputs are divided into different groups, each of which can operate at a maximum voltage of 30 volts. Each of the four groups of inputs has its own common connection. The isolation voltage ratings between these groups are up to 250 volts AC continuously and up to 1500 volts AC for 1 minute. The GE Fanuc Automation IC694MDL660 logic input module has 24 volts DC, and the input voltage range for each input is 0 to 30 volts DC.

GE IC694MDL660 可编程自动化控制器 

【其他型号推荐】