GE IC694MDL655 正反逻辑模块 单插槽模块

【产品详情】

技术规格

额定电压： 24 伏直流电

# 输入数： 32 （4 组，每组 8 人）

频率： 不适用

输入电流： 7毫安

输入电压范围： 0 至 +30V 直流

功耗： 195 mA （采用 5V 总线），224 mA （采用 24V 电源）

 该IC694MDL655是艾默生自动化 PACSystem RX3i 控制器平台的离散输入模块，以前由 GE Intelligent Platforms（GE IP） 生产。该模块是一个高密度离散输入模块，具有三十二 （32） 个数字（二进制）工作输入通道，设计用于接收 24 DC 标称或 0-30 VDC 输入电压范围和额定电压下的 7.0 mA 电流。该模块通常用于连接开/关开关，类似于二进制操作设备，例如辅助触点、接近广告光电传感器和其他设备。

IC694MDL655是一个单插槽模块，可直接安装到 PACSystem RX3i 背板的空插槽上。它可以安装到本地机架或分布式 I/O 站。模块安装的数量受处理器的内存容量或底板可用插槽的限制。

IC694MDL655是一个正反逻辑模块，因此，它可以在不同的地区使用，因为一些国家支持正逻辑，而一些国家支持其他逻辑。正逻辑是指正极线连接到模块输入通道，而负极线端接到公共端子。使用负逻辑时，连接是相反的。

IC694MDL655输入通道分为四 （4） 个输入，每组有八 （8） 个输入。模块隔离在组内，允许根据应用程序的要求独立连接组。该模块的隔离额定值为250 VAC连续隔离和1500 VAC，背板和帧接地之间持续一分钟，而模块的组间隔离额定值为50 VAC连续隔离和500 VAC持续一分钟。

GE IC694MDL655 正反逻辑模块 单插槽模块

【英文介绍】

Technical specification

Rated voltage: 24 volts DC

# Number of inputs: 32 (4 groups, 8 people each)

Frequency: Not applicable

Input current: 7 MA

Input voltage range: 0 to +30V DC

Power consumption: 195 mA (5V bus), 224 mA (24V power supply)

The IC694MDL655 is a discrete input module for Emerson Automation's PACSystem RX3i controller platform and was previously produced by GE Intelligent Platforms (GE IP). The module is a high density discrete input module with thirty-two (32) digital (binary) working input channels designed to receive 7.0 mA current at 24 DC nominal or 0-30 VDC input voltage range and rated voltage. The module is typically used to connect on/off switches, similar to binary operating devices such as auxiliary contacts, proximity advertising photoelectric sensors, and other devices.

The IC694MDL655 is a single-slot module that can be installed directly into an empty slot on the PACSystem RX3i backplane. It can be installed to local racks or distributed I/O stations. The number of modules installed is limited by the memory capacity of the processor or the available slots on the backboard.

IC694MDL655 is a positive/negative logic module, so it can be used in different regions, as some countries support positive logic and some countries support other logic. The positive logic is that the positive line is connected to the module input channel, and the negative line is connected to the common terminal. When using negative logic, the connection is reversed.

The IC694MDL655 input channel is divided into four (4) inputs, with eight (8) inputs per group. Modules are isolated within groups, allowing groups to be connected independently according to the requirements of the application. The module has an isolation rating of 250 VAC continuous isolation and 1500 VAC, lasting one minute between backplane and frame ground, while the module has an inter-group isolation rating of 50 VAC continuous isolation and 500 VAC lasting one minute.

GE IC694MDL655 正反逻辑模块 单插槽模块

【其他型号推荐】