GE IC694MDL645 数字输入模块 兼容正或负逻辑接线

【产品详情】

技术规格

额定电压： 24 伏直流电

# 输入数： 16 （1 分组）

频率： 不适用

输入电流： 7毫安

输入电压范围： 0 至 +30V 直流

功耗： 80 mA （采用 5V 总线），125 mA （采用 24V 电源）

该IC694MDL645是艾默生自动化（前身为GE智能平台（GE IP））的PACsystem RX3i系列的数字输入模块。该输入模块设计有十六 （16） 个输入通道，兼容正或负逻辑接线。该模块具有一组输入和一个公共终端。每个输入通道设计为接收 0-30 VDC 输入范围的输入电压范围和 24 VDC 的额定电压。

每个输入通道的导通状态电压为 11.5 - 30 VDC，关断状态电压为 0-5VDC，最小输入电流为 3.2 mA，最大输入电流为 1.1 mA。该模块的典型响应时间为每通道 7 ms，功耗为 80 mA @ 5VDC 和 125 mA @ 24VDC 背板总线或外部供电电压。该模块还具有 250 VAC 和 1500 VAC 的连续隔离额定值，持续 1 分钟。这种隔离是从Field到背板，也称为光隔离和帧到地隔离

GE Fanuc IC694MDL645输入模块是RX3i PACSystems模块系列的成员。该模块的额定额定电压为 24 伏直流电，它有 16 个输入，全部在 1 组中。其工作输入电压范围为 0 至 30 伏直流电。IC694MDL645输入模块设计为低压RX3i PACSystems模块，并标记为低压模块，并带有蓝色标签。IC694MDL645输入模块的输入电流额定值及其电流消耗额定值在 80 伏直流母线电压下为 5 毫安电流，在 125 伏直流电源电压下为 24 毫安电流。该模块上的所有 16 个输入都可以支持正逻辑或负逻辑。

GE Fanuc RX3i PACSystems IC694MDL645输入模块的工作温度范围为32至140华氏度或0至60摄氏度，而模块的存储温度范围为-40至185华氏度或-40至85摄氏度。此输入模块应存储在有些潮湿但不经历冷凝的环境中和使用。用于安全操作和存储的IC694MDL645输入模块的可容忍湿度范围为 5% 至 95%。只要模块的现场侧端子未连接，该模块就可以安装在 RX3i PACSystems PLC 中，或者在 PLC 通电时安全地从 PLC 中移除。IC694MDL645输入模块可以安装在RX3i PACSystems PLC背板上的任何可用插槽中。

GE IC694MDL645 数字输入模块 兼容正或负逻辑接线

【英文介绍】

Technical specification

Rated voltage: 24 volts DC

# Number of inputs: 16 (1 group)

Frequency: Not applicable

Input current: 7 MA

Input voltage range: 0 to +30V DC

Power consumption: 80 mA (5V bus), 125 mA (24V power supply)

The IC694MDL645 is a digital input module for Emerson Automation's PACsystem RX3i family, formerly GE Intelligence Platform (GE IP). The input module is designed with sixteen (16) input channels compatible with positive or negative logic wiring. The module has a set of inputs and a common terminal. Each input channel is designed to receive an input voltage range of 0-30 VDC input range and a rated voltage of 24 VDC.

The on-state voltage of each input channel is 11.5-30 VDC, the off state voltage is 0-5VDC, and the minimum input current is 3.2 mA and the maximum input current is 1.1 mA. The module has a typical response time of 7 ms per channel and power consumption of 80 mA@5VDC and 125 mA@24VDC for the backplane bus or external supply voltage. The module also has a continuous isolation rating of 250 VAC and 1500 VAC for 1 minute. This isolation is from Field to backplane, also known as optical isolation and frame-to-ground isolation

The GE Fanuc IC694MDL645 input module is a member of the RX3i PACSystems module family. The module has a rated voltage of 24 volts DC and it has 16 inputs, all in 1 set. Its operating input voltage ranges from 0 to 30 volts DC. The IC694MDL645 input module is designed as a low-voltage RX3i PACSystems module and is labeled as a low-voltage module with a blue label. The input current rating of the IC694MDL645 input module and its current consumption rating are 5 mA current at 80 V DC bus voltage and 24 MA current at 125 V DC supply voltage. All 16 inputs on this module can support either positive or negative logic.

GE Fanuc RX3i PACSystems IC694MDL645 Input modules operate in a temperature range of 32 to 140 degrees Fahrenheit or 0 to 60 degrees Celsius, while modules are stored in a temperature range of -40 to 185 degrees Fahrenheit or -40 to 85 degrees Celsius. This input module should be stored and used in an environment that is somewhat humid but does not experience condensation. The IC694MDL645 input module for safe operation and storage has a tolerable humidity range of 5% to 95%. As long as the field side terminals of the module are not connected, the module can be installed in the RX3i PACSystems PLC or safely removed from the PLC when the PLC is powered on. The IC694MDL645 input module can be installed in any available slot on the RX3i PACSystems PLC backplane.

GE IC694MDL645 数字输入模块 兼容正或负逻辑接线

【其他型号推荐】