GE IC694DSM314 运动配合模块 数字伺服放大器

【产品详情】

模块类型： 伺服运动

插槽数量： 1（单插槽）

背板支持： 通用背板

模拟输入： 4 输入数字模式，8 输入模拟模式

模拟输出： 4 输入数字模式，0 输入模拟模式

功耗： 1300 mA @ 5 VDC

GE Fanuc IC694DSM314运动配合模块，旨在成为PLC的一部分，PLC由GE RX3i PacSystems系列的背板，CPU，I / O模块和其他组件以及其他GE系列的某些组件组成。IC694DSM314运动配合模块是一种特殊用途的GE模块，这意味着它不是每个PLC的必备部件，但可以作为需要处理特定功能和应用的PLC的可选附件订购。该模块可以容纳GE RX3i系列的任何CPU模块。IC694DSM314运动配合模块可以安装在 RX3i 串行扩展机架或 90-30 系列扩展机架中，但在机架通电时，切勿安装或拆卸。

IC694DSM314模块可与GE Fanuc α系列和β系列数字伺服放大器和电机以及其他一些设备一起使用。模块功能包括速度前馈和位置误差积分器;编程单元的高分辨率;简单的 1 到 4 轴运动程序;和非易失性存储，最多可用于 10 个程序和 40 个子程序。该模块配备了单点连接，用于正确的编程和配置。闪存允许固件存储和更新。IC694DSM314具有电子CAM功能和每个轴的各种输入。

该控制模块具有 13 位模拟输出，可由 PLC 控制或用作数字伺服调谐监视器。另一个特性是通过板载本地逻辑控制实现高速数字输出（每个 24V 四个，每个 5V 四个）。IC694DSM314的电源距离背板为5 VDC，800mA加编码器电源电流。模块上的七个 LED 指示状态。统计 LED 通常亮起，表示操作正常。如果指示灯熄灭，则模块无法正常工作。状态错误由反复缓慢闪烁指示。但是，快速闪烁表明错误将停止伺服器的操作。需要注意的是，IC694DSM314必须通过位于模块底部的端子连接到框架接地。

GE IC694DSM314 运动配合模块 数字伺服放大器

【英文介绍】

Module type: Servo motion

Number of slots: 1 (single slot)

Backplane Support: Universal backplane

Analog input: 4 input digital mode, 8 input analog mode

Analog output: 4 input digital mode, 0 input analog mode

Power consumption: 1300 mA @ 5 VDC

The GE Fanuc IC694DSM314 motion fit module is designed to be part of a PLC consisting of backplanes, cpus, I/O modules and other components from the GE RX3i PacSystems family as well as certain components from other GE families. The IC694DSM314 Motion Fit module is a special purpose GE module, which means that it is not a necessary part of every PLC, but can be ordered as an optional accessory for PLCS that need to handle specific functions and applications. The module can accommodate any CPU module in the GE RX3i series. The IC694DSM314 motion fit module can be installed in the RX3i Serial expansion rack or the 90-30 Series expansion rack, but should not be installed or removed while the rack is powered on.

The IC694DSM314 module can be used with GE Fanuc alpha and beta series digital servo amplifiers and motors, as well as a number of other devices. The module functions include speed feedforward and position error integrator; High resolution of programming unit; Simple 1 to 4 axis motion program; And non-volatile storage for up to 10 programs and 40 subroutines. The module is equipped with a single point of connection for correct programming and configuration. Flash memory allows firmware storage and updates. The IC694DSM314 has electronic CAM functionality and various inputs for each axis.

The control module has a 13-bit analog output and can be controlled by a PLC or used as a digital servo tuning monitor. Another feature is high-speed digital output (four per 24V and four per 5V) via on-board local logic control. The power supply of the IC694DSM314 is 5 VDC from the backplane, 800mA plus encoder power supply current. Seven leds on the module indicate the status. Statistics LED usually lights up, indicating normal operation. If the indicator is off, the module cannot work properly. Status errors are indicated by repeated slow blinking. However, a quick flicker indicates that an error will stop the operation of the server. Note that the IC694DSM314 must be connected to the frame ground via terminals located at the bottom of the module.

GE IC694DSM314 运动配合模块 数字伺服放大器

【其他型号推荐】