GE IC694CEE0O1 CEP扩展载波 接收电源

【产品详情】

GE Fanuc的IC694CEE001载波是RX3i PacSystems系列CEP扩展载波。它是GE Fanuc制造的专用模块，是RX3i PacSystems控制器或PLC的一部分。IC694CEE001扩展载波可以与由单个RX3i I/O模块和PROFINET I/O局域网或LAN组成的远程节点连接。此扩展托架通过连接到控制器的 RX3i CEP001 托架安装在控制器中。在控制器中安装IC694CEE001扩展托架可以将额外的 RX3i IC694 I/O 模块安装到远程节点。IC694CEE001扩展托架上的电源 LED 以不同的颜色亮起，以告知用户扩展托架是否正常运行。当功率电平在正确范围内时，LED为绿色，当功率电平过低时，LED为琥珀色，当没有电源时为熄灭。

GE RX3i PacSystems IC694CEE001 CEP 扩展载波从 PLC 系统中连接到的 GE CEP001 载波接收电源。此扩展托架没有用于固件升级的 USB 连接器或任何以太网端口连接器。RX3i PacSystems IC694CEE001 CEP 扩展托架可以配置具有 SIM 8 或更高版本的 6.3 或更高版本的 Proficy Machine Edition 软件。此扩展载波模块及其主机 CEP001 载波模块都可以安装在面板或 DIN 导轨上，只要它们周围有足够的安装空间来容纳通信端口电缆和电源线，以及操作 DIN 锁存器（如果载波安装在 DIN 导轨上）。还应该有足够的自由空间来允许载流子散发过多的热量。

GE IC694CEE0O1 CEP扩展载波 接收电源

【英文介绍】

GE Fanuc's IC694CEE001 carrier is the RX3i PacSystems series CEP extended carrier. It is a purpose-built module manufactured by GE Fanuc and is part of the RX3i PacSystems controller or PLC. The IC694CEE001 extended carrier can be connected to remote nodes consisting of a single RX3i I/O module and a PROFINET I/O local area network or LAN. This expansion bracket is installed in the controller via the RX3i CEP001 bracket connected to the controller. Installing the IC694CEE001 expansion tray in the controller can install additional RX3i IC694 I/O modules to remote nodes. The power LED on the IC694CEE001 expansion bay lights up in a different color to inform the user whether the expansion bay is working properly. When the power level is in the correct range, the LED is green, when the power level is too low, the LED is amber, and when there is no power supply, it is off.

GE RX3i PacSystems IC694CEE001 CEP Extended carrier Receives power from the GE CEP001 carrier connected to the PLC system. This expansion bay does not have a USB connector or any Ethernet port connector for firmware upgrades. The RX3i PacSystems IC694CEE001 CEP expansion bay can be configured with Proficy Machine Edition software 6.3 or later with SIM 8 or later. Both this extended carrier module and its host CEP001 carrier module can be mounted on a panel or DIN rail, provided there is sufficient mounting space around them to accommodate the communication port cable and power cord, as well as operating the DIN latch if the carrier is mounted on the DIN rail. There should also be enough free space to allow carriers to emit excessive heat.

GE IC694CEE0O1 CEP扩展载波 接收电源

【其他型号推荐】