GE  IC694APU300 工业高速计数器模块 用于流量测量应用

【产品详情】

处理速度： 80千赫

输入电压范围： 5 VDC 或 10-30 VDC（TSEL 开路）

输出电压范围： 10-30V 直流 @ 500mA 或 4.75-6VDC @ 20mA

模块类型： 高速计数器

输入/输出类型： 正逻辑

功耗： 250mA （来自 5V 总线）

GE Fanuc的IC694APU300模块是一种工业高速计数器模块。它由GE Fanuc在RX3i PACSystems系列中制造。IC694APU300高速计数器模块设计用于处理高速脉冲信号，并将这些高速脉冲信号用于流量测量应用、速度控制应用和其他动态工业应用。该计数器模块可以安全地处理频率额定值高达 1 兆赫兹的脉冲信号。它可以在几分之一秒的时间内执行复杂的方程。IC694APU300高速计数器模块采用直流电源运行。其输入电压额定值可以是 5 伏直流电或 10 至 30 伏直流电，其输出电压额定值可以是 10 至 30 伏直流电（额定电流为 500 毫安）或 4.75 至 6 伏直流电，额定电流为 20 毫安。

GE Fanuc RX3i PACSystems IC694APU300高速计数器模块具有4个正逻辑输出和12个单端正逻辑输入或6个差分正逻辑输入。IC694APU300高速计数器模块的额定功耗为 1.25 瓦或 250 毫安。其最大额定处理速度为 80 千赫兹。该计数器模块不需要连接到可编程逻辑控制器（PLC）或PLC中的中央处理器（CPU）即可运行。它可以独立运行。IC694APU300高速计数器模块上没有 DIP 开关。它的所有接线都应该用铜线完成。

GE Fanuc IC694APU300高速计数器模块被设计为一种快速有效的解决方案，用于使用高速脉冲信号来控制动态应用过程，如流量测量和速度控制。它作为一个集成的过程控制器工作，接收频率高达1 MHz的脉冲序列信号，在几分之一秒内执行复杂的数学计算，然后通过其输出端口发送响应，而无需连接中央处理器（CPU）或可编程逻辑控制器（PLC）。GE Fanuc IC694APU300高速计数器模块可以在 5 伏直流电源下运行。有 2 个可配置的输入电压：5 伏直流或 10 至 30 伏直流。输出电压范围也可由用户定制，额定电流为 10 毫安时为 30 至 500 伏直流电，额定电流为 4 毫安时为 75.6 至 20 伏直流电。

GE  IC694APU300 工业高速计数器模块 用于流量测量应用

【英文介绍】

Processing speed: 80 KHZ

Input voltage range: 5 VDC or 10-30 VDC (TSEL open circuit)

Output voltage range: 10-30V DC @ 500mA or 4.75-6VDC @ 20mA

Module type: High speed counter

Input/Output type: positive logic

Power consumption: 250mA (from 5V bus)

GE Fanuc's IC694APU300 module is an industrial high-speed counter module. It is manufactured by GE Fanuc in the RX3i PACSystems family. The IC694APU300 High speed counter module is designed to process high speed pulse signals and use these high speed pulse signals for flow measurement applications, speed control applications and other dynamic industrial applications. The counter module can safely handle pulse signals with frequency ratings up to 1 MHZ. It can perform complex equations in a fraction of a second. The IC694APU300 high speed counter module operates with DC power supply. Its input voltage rating can be 5 volts DC or 10 to 30 volts DC, and its output voltage rating can be 10 to 30 volts DC (rated at 500 mA) or 4.75 to 6 volts DC (rated at 20 mA).

The GE Fanuc RX3i PACSystems IC694APU300 high-speed counter module has 4 positive logic outputs and 12 single-end logic inputs or 6 differential positive logic inputs. The IC694APU300 high-speed counter module is rated for power consumption of 1.25 watts or 250 mA. Its maximum rated processing speed is 80 kilohertz. The counter module does not need to be connected to a programmable logic controller (PLC) or central processing unit (CPU) in the PLC to operate. It can operate independently. There is no DIP switch on the IC694APU300 high-speed counter module. All of its wiring should be done with copper wire.

The GE Fanuc IC694APU300 High Speed counter module is designed as a fast and efficient solution for using high speed pulse signals to control dynamic application processes such as flow measurement and speed control. It works as an integrated process controller, receiving pulse train signals with frequencies up to 1 MHz, performing complex mathematical calculations in a fraction of a second, and then sending a response through its output port without the need to connect a central processing unit (CPU) or programmable logic controller (PLC). The GE Fanuc IC694APU300 High speed counter module can operate on a 5 volt DC power supply. There are 2 configurable input voltages: 5 volts DC or 10 to 30 volts DC. The output voltage range can also be customized by the user, with a current rating of 30 to 500 volts DC for 10 mah and 75.6 to 20 volts DC for 4 mah.

GE  IC694APU300 工业高速计数器模块 用于流量测量应用

【其他型号推荐】