GE IC660TBR111 I/O终端组件 16 电路继电器输出模块
【产品详情】
GE Fanuc IC660TBR111终端组件是一个Genius I/O终端组件。IC660TBR111终端组件与GE Fanuc IC660BBR101 I/O模块兼容。
GE Fanuc IC660TBR111端子组件是IC660BBR101输出块的端子组件,它是一个 16 电路继电器输出模块。IC660TBR111端子组件未经 UL 认证。IC660TBR111端子组件是输出模块的主要部件之一,电子组件是I/O模块的另一个重要部件。IC660TBR111端子组件仅与具有相似额定电压和类似接线配置的电子组件兼容。I/O 模块的活动组件位于电子组件中。现场设备的所有拧干都端接在端子组件上。IC660BBR101输出模块是带有常开继电器的 16 电路继电器输出模块。连接到模块的输出设备可以在 5 至 250 伏交流电或 5 至 220 伏直流电的范围内运行。此 I/O 模块可切换高达 60 瓦或 125 VA 的功率。
GE Fanuc IC660BBR101输出模块可以在 92 至 132 伏交流电或 185 至 265 伏交流电下工作。IC660BBR101输出模块的额定电流消耗在 85 伏交流电时为 115 毫安。该模块的输出规格包括每个电路的最大输出电流为 2 安培,每个电路的最大浪涌电流为 2 安培,输出关断状态漏电流为 0.1 毫安,感性负载下每分钟 20 个周期的最大开关频率、5 毫秒的输出导通延迟和 10 毫安的最小推荐负载。继电器规格包括 100 毫欧的初始接触电阻,继电器类型为固定线圈移动电枢继电器。I/O 块周围的空气温度应保持在 32 到 140 华氏度的范围内。
GE IC660TBR111 I/O终端组件 16 电路继电器输出模块
【英文介绍】
The GE Fanuc IC660TBR111 terminal component is a Genius I/O terminal component. The IC660TBR111 terminal component is compatible with the GE Fanuc IC660BBR101 I/O module.
The GE Fanuc IC660TBR111 terminal assembly is a terminal assembly of the IC660BBR101 output block, which is a 16-circuit relay output module. The IC660TBR111 terminal assembly is not UL certified. The IC660TBR111 terminal assembly is one of the main components of the output module, and the electronic assembly is another important component of the I/O module. The IC660TBR111 terminal assembly is only compatible with electronic assemblies with similar voltage ratings and similar wiring configurations. The active component of the I/O module is located in the electronic component. All wringing of the field device ends in the terminal assembly. The IC660BBR101 output module is a 16-circuit relay output module with a normally open relay. The output device connected to the module can operate in the range of 5 to 250 volts AC or 5 to 220 volts DC. This I/O module can switch power up to 60 watts or 125 VA.
The GE Fanuc IC660BBR101 output module can operate at 92 to 132 volts AC or 185 to 265 volts AC. The IC660BBR101 output module has a rated current consumption of 115 mA at 85 volts AC. The module's output specifications include a maximum output current of 2 amps per circuit, a maximum surge current of 2 amps per circuit, an output turn-off leakage current of 0.1 mA, a maximum switching frequency of 20 cycles per minute under inductive load, a 5 ms output turn-on delay, and a minimum recommended load of 10 mA. Relay specifications include an initial contact resistance of 100 milliohm and the relay type is a fixed coil moving armature relay. The air temperature around the I/O block should be kept in the range of 32 to 140 degrees Fahrenheit.
GE IC660TBR111 I/O终端组件 16 电路继电器输出模块
【其他型号推荐】
TRICON 3004 | Triconex DCS | 输出模块 | BENTLY 330980-70-00 | 红外线点温计 | Bently Nevada |
TRICON 8110 | Triconex DCS | 高密度主机箱 | BENTLY 330980-51-05 | I/O 电源 | Bently Nevada |
TRICON 4211 | Triconex DCS | 远程扩展器模块 | BENTLY 330980-51-00 | 励磁系统电源模块 | Bently Nevada |
TRICON 3502E | Triconex DCS | 数字输入模块 | BENTLY 330980-50-05 | 控制屏 | Bently Nevada |
TRICON 3805H | Triconex DCS | 模拟量输出模块 | BENTLY 330980-50-00 | 主控制板 | Bently Nevada |
TRICON 3601E | Triconex DCS | 数字输出模块 | BENTLY 3309300650205 | 位移变送器 | Bently Nevada |
TRICON 3501E | Triconex DCS | 数字输入模块 | BENTLY 330930-065-02-00 | 无刷励磁系统 | Bently Nevada |
TRICON 3601E | Triconex DCS | 数字输出模块 | BENTLY 3309300650000 | 直流调速器控制板 | Bently Nevada |
TRICON 3703E | Triconex DCS | 模拟输入模块 | BENTLY 330930-045-01-00 | 控制器专用电池 | Bently Nevada |
TRICON 3700A | Triconex DCS | 模拟输入模块 | BENTLY 330930-045-00-05 | 接口 | Bently Nevada |
TRICON 3511 | Triconex DCS | 输入脉冲模块 | BENTLY 330930-040-01-00 | 张力控制系统功率板 | Bently Nevada |
TRICONEX 3664 | Triconex DCS | 数字量输出模块 | BENTLY 3309300400100 | 电池电路板 | Bently Nevada |
TRICONEX 3451 | Triconex DCS | 模拟输出模块 | BENTLY 330930-040-00-CN | 直流调速器 | Bently Nevada |