GE IC660TBR101   I/O设备的终端组件 有源组件和通信电路

【产品详情】

GE Fanuc IC660TBR101组件是Genius I/O设备的终端组件。IC660TBR101端子组件与IC660BBR101 I/O 块兼容。

IC660TBR101端子组件是GE Fanuc Genius I/O模块的端子组件，带有目录号IC660BBR101的常开继电器。像IC660TBR101端子组件这样的接线端子是Genius I/O模块的1个主要组件中的2个，另一个组件是电子组件。IC660TBR101端子组件形成块基座，所有现场接线连接都与其连接。Genius I/O模块的配置数据存储在端子组件中，因此如果更换了电子组件，则无需重新配置I/O模块。端子组件采用机械和电气键控，以接受在电压、接线配置和电路数量方面相同类型的电子组件。

另一个模块组件，即电子组件，容纳 I/O 模块的 I/O、有源组件和通信电路。可以在不干扰现场接线的情况下更换电子组件。设计IC660TBR101端子组件的 I/O 块，即ICC660BBR101 I/O 块，是一个 16 电路继电器输出块。输出分为 4 个隔离组，每个组 4 个电路。I/O 块重 4 磅，尺寸约为 224 x 35 x 39 毫米。模块的推荐工作温度范围为 0 至 60 摄氏度。对于运输和储存，环境温度的推荐范围为-40至100摄氏度。I/O 模块的电流要求在 87 伏交流电时为 115 毫安。交流电源电压范围为 93 至 132 伏交流电和 185 至 265 伏交流电。

GE IC660TBR101   I/O设备的终端组件 有源组件和通信电路

【英文介绍】

The GE Fanuc IC660TBR101 component is the terminal component of the Genius I/O device. The IC660TBR101 terminal assembly is compatible with the IC660BBR101 I/O block.

The IC660TBR101 terminal assembly is the terminal assembly of the GE Fanuc Genius I/O module. It is equipped with the normally open relay of the directory number IC660BBR101. Terminals like the IC660TBR101 terminal assembly are 2 of 1 main components of the Genius I/O module, the other component being the electronic component. The IC660TBR101 terminal assembly forms a block base to which all field wiring connections are connected. The configuration data for the Genius I/O module is stored in the terminal assembly, so if the electronic components are replaced, there is no need to reconfigure the I/O module. Terminal assemblies are mechanically and electrically keyed to accept the same type of electronic assemblies in terms of voltage, wiring configuration and number of circuits.

Another module component, the electronics component, houses the I/O module's I/O, active components, and communication circuits. Electronic components can be replaced without interfering with field wiring. Design the I/O block of the IC660TBR101 terminal assembly, that is, the ICC660BBR101 I/O block, is a 16-circuit relay output block. The output is divided into four isolation groups with four circuits in each group. The I/O block weighs 4 pounds and measures approximately 224 x 35 x 39 mm. The recommended operating temperature range of the module is 0 to 60 degrees Celsius. For transport and storage, the recommended ambient temperature range is -40 to 100 degrees Celsius. The current of the I/O module is required to be 115 MA at 87 volts AC. The AC supply voltage ranges from 93 to 132 volts AC and 185 to 265 volts AC.

GE IC660TBR101   I/O设备的终端组件 有源组件和通信电路

【其他型号推荐】