GE IC660TBD023 I/O端子组件 具有 16 个离散 I/O 的块类型

【产品详情】

GE Fanuc Genius I/O端子组件被称为IC660TBD023终端组件，专为高性能系统而设计，其指定工作电压范围为18至30伏直流电。该组件采用具有 16 个离散 I/O 的块类型，直流操作的压差时间为 10 毫秒。

IC660TBD023终端组件是GE发那科设计的Genius I/O系列工业终端组件。此 Genius I/O 端子组件适用于以下模块型号：IC660T、IC660TB 和 IC660TBD。端子组件用于在输入电压额定值为 24 伏的直流电源上运行的块式，包括 16 个灌电流输入和输出。IC660TBD023端子组件在每个电路的负载侧都有单独的 LED 指示灯，并在模块上配有标准 LED 指示灯。该端子以 68.8 瓦的速率散热，并具有 1500 伏的模块来阻止隔离。该端子的电源压降时间为 10 毫秒，需要 150 毫安（典型值）和最大 300 毫安的直流电源额定电流。

GE IC660TBD023端子组件具有标准输入电压，包括输入打开时的 0 至 8 伏直流电压和输入关闭时 17 至 24 伏直流电的电压范围。该元件包括一个 1.8 kohms 的典型输入阻抗。可选输入滤波器所需的时间为 5 到 100 毫秒，IC660TBD023端子组件具有过热、开关部件故障和开路情况的诊断功能。对于输出，端子组件在 2 摄氏度的温度下每个电路的输出电流为 15 安培，块输出电流为 35 安培。最大开关频率为每秒一次，输出导通延迟时间为1毫秒。未启用负载时，建议负载为 50 毫安。

GE IC660TBD023 I/O端子组件 具有 16 个离散 I/O 的块类型

【英文介绍】

The GE Fanuc Genius I/O terminal assembly, known as the IC660TBD023 Terminal Assembly, is designed for high performance systems with a specified operating voltage range of 18 to 30 volts DC. The component uses a block type with 16 discrete I/ OS and a differential pressure time of 10 milliseconds for DC operation.

The IC660TBD023 terminal assembly is the Genius I/O series industrial terminal assembly designed by GE Fanuc. This Genius I/O terminal assembly is applicable to the following module models: IC660T, IC660TB, and IC660TBD. The terminal assembly is a block type for operation on a DC power supply with an input voltage rating of 24 volts, consisting of 16 input and output. The IC660TBD023 terminal assembly has a separate LED indicator on the load side of each circuit and a standard LED indicator on the module. The terminal dissipates heat at a rate of 68.8 watts and has a 1500 volt module to prevent isolation. The terminal has a power voltage drop time of 10 milliseconds and requires 150 mA (typical) and a maximum DC power rating of 300 mA.

The GE IC660TBD023 terminal assembly has standard input voltages ranging from 0 to 8 volts DC when the input is on and from 17 to 24 volts DC when the input is off. The element includes a typical input impedance of 1.8 kohms. The time required for the optional input filter ranges from 5 to 100 ms, and the IC660TBD023 terminal assembly has diagnostic functions for overheating, switch component failure and open circuit conditions. For the output, the terminal assembly has an output current of 15 amps per circuit and the block output current of 35 amps at a temperature of 2 degrees Celsius. The maximum switching frequency is once per second and the output on-delay time is 1 millisecond. When the load is not enabled, the recommended load is 50 MA.

GE IC660TBD023 I/O端子组件 具有 16 个离散 I/O 的块类型

【其他型号推荐】