GE IC660TBA105 具有6个电流源输出 终端组件

【产品详情】

IC660TBA105端子组件由GE Fanuc制造，具有6个电流源输出。该组件的预期电压为 115 伏交流电或 125 伏直流电，电源电压范围为 93 至 132 伏交流电或 105 至 145 伏直流电。

GE Fanuc终端组件被称为IC660TBA105终端组件，用于工业控制系统，该系统由必须在高水平上运行的高质量组件组成。端子组件是电流源模拟输出模块的一部分，其输出具有不同的功能以及至关重要的诊断功能。端子组件在 0 摄氏度的温度水平下具有 15.25% 的输出精度，其故障报告功能可以针对特定电路打开或关闭。IC660TBA105终端组件是GE Genius I/O组件，与Genius系列的总线控制器兼容，并且还能够与PCIM和QBIM等模块连接。块的配置通过手持监视器执行。

IC660TBA105端子组件可以承受 5 到 10 赫兹的振动和 5.08 毫米（0.2 英寸）的位移。终端操作环境中的相对湿度水平应在 5% 到 95% 之间。该装置可以储存在 -40 至 100 摄氏度或 -40 至 212 华氏度的温度范围内。工作温度范围为 0 至 60 摄氏度或 32 至 140 华氏度。IC660TBA105端子组件的额定电压为 115 伏交流电和 125 伏直流电，它需要一个最大电流为 250 毫安的电源（用于交流操作），最大电流为 140 毫安用于直流操作。该装置的最小电源压降时间为 10 毫秒，纹波最大值为 10%。IC660TBA105端子组件在发生满量程读数时具有0.15%的输出信号精度，更新频率为25毫秒。

GE IC660TBA105 具有6个电流源输出 终端组件

【英文介绍】

The IC660TBA105 terminal assembly is manufactured by GE Fanuc and has 6 current source outputs. The expected voltage of the assembly is 115 volts AC or 125 volts DC, and the supply voltage range is 93 to 132 volts AC or 105 to 145 volts DC.

GE Fanuc terminal components, known as IC660TBA105 terminal components, are used in industrial control systems that consist of high-quality components that must operate at a high level. The terminal assembly is part of the current source analog output module, and its output has different functions as well as crucial diagnostic functions. The terminal assembly has an output accuracy of 15.25% at a temperature level of 0 degrees Celsius, and its fault reporting function can be turned on or off for a specific circuit. The IC660TBA105 terminal component is a GE Genius I/O component that is compatible with the Genius family of bus controllers and can also connect to modules such as PCIM and QBIM. The configuration of the block is performed by a handheld monitor.

The IC660TBA105 terminal assembly can withstand vibrations of 5 to 10 Hz and a displacement of 5.08 mm (0.2 in). The relative humidity level in the terminal operating environment should be between 5% and 95%. The device can be stored in a temperature range of -40 to 100 degrees Celsius or -40 to 212 degrees Fahrenheit. Operating temperatures range from 0 to 60 degrees Celsius or 32 to 140 degrees Fahrenheit. The IC660TBA105 terminal assembly is rated at 115 volts AC and 125 volts DC and requires a power supply with a maximum current of 250 MA (for AC operation) and 140 mA for DC operation. The device has a minimum power voltage drop time of 10 milliseconds and a ripple maximum of 10 percent. The IC660TBA105 terminal assembly has an output signal accuracy of 0.15% when a full scale reading occurs, with an update frequency of 25 milliseconds.

GE IC660TBA105 具有6个电流源输出 终端组件

【其他型号推荐】