GE IC660TBA026 带有电流源的输出模块 设计有6个输入
【产品详情】
IC660TBA026输出模块是GE发那科制造的带有电流源的输出模块。它设计有6个输入,可以容纳4到20毫安的信号。该模块的额定输入电压为交流115伏和直流125伏。该模块的主要功能是为所有连接的电路供电。块体在25℃下的输出精度为0.15%。IC660TBA026输出模块带有一个输出,可以通过总线电缆系统运行总线交换模块。该块具有其他功能,包括输出保持最后状态功能,易于电路缩放,输出反馈检查和CPU冗余功能。通过使用输出块,可以很容易地启用或禁用故障报告。
通过增强的诊断检查功能,IC660TBA026输出模块可以检测输出中超出范围和低于范围的情况。当输出反馈小于1.5毫安时,它还可以提醒操作人员。操作温度应在0 ~ 60摄氏度之间,可在-40 ~ 100摄氏度的温度下保存。IC660TBA026输出块在前面板上有一个监控端口,可以添加到手持监视器和控制器设备的连接。此外,该块具有串口1和串口2以及屏蔽输入端口和屏蔽输出端口。砌块体积小,安装时可节省大量面板空间。它的尺寸为高8.83英寸,深3.94英寸,宽3.50英寸。它散发12瓦的热量。
GE IC660TBA026 带有电流源的输出模块 设计有6个输入
【英文介绍】
The IC660TBA026 output block is a GE Fanuc manufactured output block with a current source. It is designed with 6 inputs that can accommodate signals in the range of 4 to 20 milliAmps. The input voltage rating of the block is 115 Volts AC and 125 Volts DC. The main function of the block is to supply power to all the connected circuits. The output accuracy of the block at 25 degrees Celsius is 0.15%. The IC660TBA026 output block comes with an output that can run the bus switching module by using the bus cable system. The block has additional features that include the output hold-last-state feature, easy circuit scaling, output feedback checking, and CPU redundancy feature. The fault reporting can be easily enabled or disabled by using the output block.
With the enhanced diagnostic check feature, the IC660TBA026 output block can detect over range and under range situations in the output. It can also alert the operators when the output feedback is less than 1.5 milliAmps. The temperature should be between 0 and 60 degrees Celsius for operation and it can be stored at a temperatire between -40 and 100 degrees Celsius. The IC660TBA026 output block has a monitoring port on the front panel that can add connectivity to handheld monitors and controller devices. Also, the block has Serial Port 1 and Serial Port 2 along with a Shield In Port and Shield Out Port. The block is small in size that saves a lot of panel space during installation. It has dimensions of 8.83 inches in height, 3.94 inches in depth, and 3.50 inches in width. It dissipates 12 Watts of heat.
GE IC660TBA026 带有电流源的输出模块 设计有6个输入
【其他型号推荐】
TRICONEX 9563-810 | Triconex DCS | 开关量输入端子板 | BENTLY 3500/53PWA-133388-01R | 轴计算机板 | Bently Nevada |
TRICONEX 4351A | Triconex DCS | 通讯模块 | BENTLY 3500/53PN133396-01 | 机器人底板 | Bently Nevada |
TRICONEX AI3351 | Triconex DCS | 模拟量输入模块 | BENTLY 3500/53M | 变频器主控板 | Bently Nevada |
TRICONEX 3721 | Triconex DCS | 模拟量输入卡件 | BENTLY 3500/53-03-03-00 | 电流互感器 | Bently Nevada |
TRICONEX 4119A | Triconex DCS | PLC 模块 | BENTLY 3500/53-03-00 | 低压变频器 | Bently Nevada |
J-097-B-039 | Triconex DCS | 控制器模块 | BENTLY 3500/53-01-00 | 可编程控制器模块 | Bently Nevada |
J-097-B-253-A | Triconex DCS | 热电偶 | BENTLY 3500/53 PWA-133388-01R | 晶闸管模块 | Bently Nevada |
TRICONEX 3664 | Triconex DCS | 输入输出故障诊断 | BENTLY 3500/53 PN 133396-01 | 电池支架 | Bently Nevada |
TRICONEX 3511 | Triconex DCS | DCS模块 | BENTLY 3500/53 13396-01 | 机器人减速机 | Bently Nevada |
TRICONEX DI2301 | Triconex DCS | 卡件 | BENTLY 3500/53 | 电动机保护 继电器 | Bently Nevada |
TRICONEX D06603 | Triconex DCS | PLC 模块 | BENTLY 3500/50MP WA-286566-02G | 桥控制器 | Bently Nevada |
TRICONEX AO3481 | Triconex DCS | AO卡件 | BENTLY 3500/50M 286566-02 | 综合保护继电器 | Bently Nevada |
TRICONEX AO2481 | Triconex DCS | 模拟量输入模块 | BENTLY 3500/50M PWA-286566-02G | 安全CPU模块 | Bently Nevada |