IC660ELB921 单插槽PC接口模块 控制器

【产品详情】

IC660ELB921是一个PC接口模块（PCIM），主要用于连接驻留在Genius I/O总线上的Genius I/O设备，允许由主机控制器实现数据交换和类似控制器的功能。该PCIM模块以前由GE Fanuc生产，目前隶属于艾默生自动化。IC660ELB921是一个单插槽PC接口模块，支持安装目录号为IC660ELB912的单个子板。此接口模块安装到主机的 ISA 插槽，需要主机设备的 4 字节内存和已安装的子卡的额外 16 KB 内存。它从背板吸收的电流为 400 mA，在 5 VDC 时最大，+/- 10%。它具有每个输入 1 LS TTL 负载的总线负载和每个输出 10 LS TTL 负载的总线驱动能力。此PCIM卡是单插槽“AT”样式板。它提供与外部手持监视器 （HHM） 的连接，以及通过板边缘端子或外部连接器的串行总线连接。IC660ELB921带有状态 LED 指示灯，例如子板正常和通信正常。IC660ELB921的工作温度为 0–60 C（32–140 F），而存储温度为 –40 至 +70 C（–40 至 158 F），相对湿度为 5-95%（非冷凝）。它的工作高度为 40,00 英尺，工作振动为 0.2 英寸位移，工作冲击为 5 G，持续时间为 10 毫秒。IC660ELB921是使用 PCIM 配置软件配置的，其中可以访问提供高级接口的软件库。该软件库以与MSDOS操作系统（如C / MSDOS和BASIC/MSDOS）兼容的版本提供。

IC660ELB921 PC接口模块是GE Fanuc制造的单通道PCIM板，是Genius I-O系列的一部分。它一次只能连接到 1 条天才总线。此模块用于 IBM PC、XT 和 AT 类型的个人计算机。该AT型接口板还兼容不同的Genius通信协议以及通信时序。IC660ELB921 PC 接口模块提供单个子板和主板。此模块随附的配置软件可用于独立于主板配置子板。子板可以单独与Genius总线设备连接，并充当I/O系统的通用I/O控制器。

IC660ELB921单插槽 PCIM 主板具有高效的主板，可将子板与兼容 IBM 的主机连接起来。它用于缓冲与系统主机总线通信所需的所有信号。主板提供的一些子板控制和监控设施包括ISA兼容背板、低电源电压电平检测、通过存储器映射进行地址解码以及信号排序。每个子板都有 2 个 LED，用于指示板的状态和通信过程。主板的内存要求为 4 字节，子板的要求为 16 KB。IC660ELB921 PC 接口模块随附配置软件和 PCIM 软件库，在用户开发的软件和 PCIM 之间提供高级接口。它使用 5 伏直流电的逻辑电源，并且不应超过标称电平的 10%，以使模块正常运行。在安装过程中，请确保在此模块和其他模块之间留出至少 1/8 英寸的空间，以便适当冷却。

IC660ELB921 单插槽PC接口模块 控制器

【英文介绍】

The IC660ELB921 is a PC interface module (PCIM) that connects Genius I/O devices residing on the Genius I/O bus, allowing data exchange and controller like functions to be implemented by the host controller. The PCIM module was previously produced by GE Fanuc and is now part of Emerson Automation. The IC660ELB921 is a single-slot PC interface module that supports the installation of a single subboard whose directory number is IC660ELB912. Installing this interface module into the ISA slot of the host requires 4 bytes of memory from the host device and an additional 16 KB of memory from the installed sub-card. The current it absorbs from the backplane is 400 mA, which is maximum at 5 VDC, +/- 10%. It has bus load of 1 LS TTL load per input and bus driver capability of 10 LS TTL load per output. The PCIM card is a single-slot "AT" style board. It provides connection to an external handheld monitor (HHM), as well as serial bus connection via board edge terminals or external connectors. The IC660ELB921 comes with status LED indicators, such as daughter board normal and communication normal. The IC660ELB921 operates at 0-60 C (32-140 F), while the storage temperature is -40 to +70 C (-40 to 158 F) and the relative humidity is 5-95% (non-condensing). It has an operating height of 40,00 feet, an operating vibration of 0.2 inch displacement, an operating shock of 5 G, and a duration of 10 milliseconds. The IC660ELB921 is configured using PCIM configuration software, which provides access to a software library that provides advanced interfaces. The software library is available in versions compatible with MSDOS operating systems such as C/MSDOS and BASIC/MSDOS.

The IC660ELB921 PC interface module is a single channel PCIM board manufactured by GE Fanuc and is part of the Genius I-O series. It can only connect to 1 Genius bus at a time. This module is used for IBM PC, XT, and AT types of personal computers. The AT-type interface board is also compatible with different Genius communication protocols and communication timing. The IC660ELB921 PC interface module provides a single subboard and mainboard. The configuration software that comes with this module can be used to configure the subboard independently of the motherboard. The child board can be individually connected to the Genius bus device and act as a universal I/O controller for the I/O system.

The IC660ELB921 single-slot PCIM motherboard features an efficient motherboard that connects the daughter board to an IBM-compatible mainframe. It is used to buffer all the signals needed to communicate with the system host bus. Some of the sub-board control and monitoring facilities provided by the motherboard include ISA-compatible backplanes, low power voltage level detection, address decoding via memory mapping, and signal sorting. Each subboard has 2 leds that indicate the status of the board and the communication process. The memory requirements of the motherboard are 4 bytes, and the requirements of the daughter board are 16 KB. The IC660ELB921 PC interface module comes with the configuration software and PCIM software library to provide an advanced interface between user-developed software and PCIM. It uses a logic power supply of 5 volts DC and should not exceed 10% of the nominal level for the module to operate properly. During installation, be sure to leave at least 1/8 inch of space between this module and other modules for proper cooling.

IC660ELB921 单插槽PC接口模块 控制器

【其他型号推荐】