IC660ELB912 天才网络接口卡 具有I/O控制器功能

【产品详情】

IC660ELB912是天才网络接口卡。此模块是 IBM PC 接口模块 （PCIM） 的子板。该卡安装在单插槽或双插槽PCIM模块上，使主机控制器具有I/O控制器功能，允许通过Genius I/O网络控制、监控和管理远程I/O设备。PCIM卡的这个子板以前由GE Fanuc制造，现在隶属于艾默生自动化。IC660ELB912负责执行内务管理任务，例如驻留在同一个Genius I/O网络上的多达30个设备的初始化和故障管理。它维护受控设备的最新数据图像，并能够通过发送和接收与 I/O 命令或全局数据无关的后台消息，通过同一网络与其他控制器交换数据。主机 PCIM 设备提供状态 LED 指示灯，用于确定所连接子板的操作，特别是 GENI 正常和通信正常。它支持各种可配置的数据速率，例如 38.4K、76.8K、153.6K 标准或 153.6K 扩展。如果两 （2） 个子板连接到双插槽 PCIM，并且每个子板连接到单独的 Genius I/O 总线，则每个子板必须设置为与卡连接的波特率相同。此外，两个子板可以连接到同一总线，因此，每个子板必须配置相同的波特率。单个子板需要 16KB 的主机内存，如果安装了两 （32） 个子板，则需要 2KB。

IC660ELB912 Micro GENI子板是GE Fanuc的网络接口板。它属于Genius I/O系列模块和PLC组件。它具有向后兼容的块、共享 RAM 和 16 KB 内存。这款微型 GENI 子板可与单插槽或双插槽 IBM PC 接口模块 （PCIM） 连接，需要 5 伏直流额定电源来提供逻辑电源。IC660ELB912 Micro GENI 子板可以使用垫片和螺钉轻松安装。它带有 2 个状态指示 LED，用于通知操作员设备的状态，这些 LED 指示灯分别是 GENI OK LED 和 COMMS OK LED，分别显示设备的运行和通信状态。2 个 LED 位于模块面板上，用于显示设备的操作和通信。

IC660ELB912 Micro GENI网络接口板是专为Genius I/O系统设计的通用I/O控制器。它为多达 30 个总线模块提供故障检测功能。来自该模块的所有通信信号都通过主板缓冲到主机总线。它还提供有效的沟通。该模块的共享 RAM 经过优化，可与 IBM 个人计算机配合使用。此系统内存存储缓冲数据、I/O 数据和其他信息。它为用户提供了使用远程 I/O 的工具。IC660ELB912 Micro GENI 子板具有 6303 微处理器，可提供最佳的消息写入设施和最大的内存容量。该子板带有一个用于配置的 DIP 开关。在安装过程中，请确保模块之间至少留出 1/8 英寸的空间，以提供冷却所需的气流。

IC660ELB912 天才网络接口卡 具有I/O控制器功能

【英文介绍】

IC660ELB912 is a genius network interface card. This module is a sub-board of the IBM PC Interface Module (PCIM). The card is mounted on a single - or two-slot PCIM module and gives the host controller I/O controller functionality, allowing remote I/O devices to be controlled, monitored, and managed over the Genius I/O network. This subboard of the PCIM card was formerly manufactured by GE Fanuc and is now owned by Emerson Automation. The IC660ELB912 is responsible for performing housekeeping tasks such as initialization and fault management of up to 30 devices residing on the same Genius I/O network. It maintains up-to-date data images of controlled devices and is able to exchange data with other controllers over the same network by sending and receiving background messages that are not related to I/O commands or global data. The host PCIM device provides a status LED indicator to determine the operation of the connected child board, especially that the GENI is normal and communication is normal. It supports a variety of configurable data rates, such as 38.4K, 76.8K, 153.6K standard or 153.6K extension. If two (2) child boards are connected to a two-slot PCIM, and each child board is connected to a separate Genius I/O bus, each child board must be set to the same baud rate as the card is connected to. In addition, two subboards can be connected to the same bus, so each subboard must be configured with the same baud rate. A single subboard requires 16KB of host memory, or 2KB if two (32) subboards are installed.

The IC660ELB912 Micro GENI subboard is a network interface board of GE Fanuc. It belongs to the Genius I/O family of modules and PLC components. It has backward-compatible blocks, shared RAM, and 16 KB of memory. This mini GENI subboard can be connected to a single - or two-slot IBM PC interface module (PCIM) and requires a 5-volt DC rated power supply to provide logic power. The IC660ELB912 Micro GENI subroutine can be easily installed using gaskets and screws. It comes with 2 status indicator leds to inform the operator of the status of the equipment, these LED leds are GENI OK LED and COMMS OK LED, respectively, showing the operation and communication status of the equipment. Two leds are located on the module panel to display the operation and communication of the device.

The IC660ELB912 Micro GENI Network Interface Board is a universal I/O controller designed for Genius I/O systems. It provides fault detection for up to 30 bus modules. All communication signals from this module are buffered to the host bus via the motherboard. It also provides effective communication. The module's shared RAM is optimized for use with IBM personal computers. This system memory stores buffer data, I/O data, and other information. It provides users with the tools to use remote I/O. The IC660ELB912 Micro GENI daughter board features a 6303 microprocessor that provides optimal message writing facilities and maximum memory capacity. The child board comes with a DIP switch for configuration. During installation, make sure to leave at least 1/8 inch of space between modules to provide airflow needed for cooling.

IC660ELB912 天才网络接口卡 具有I/O控制器功能

【其他型号推荐】