IC660EBR100 具有16个电路继电器输出 电子装配模块

【产品详情】

IC660EBR100电子装配模块由GE智能平台/GE Fanuc Automation制造。它属于Genius I / O系列，具有16个电路继电器输出，分别放置在4个独立的组中，每个组4个输出，每个电路上都有一个具有单独继电器线圈状态的LED。该电子组件的重量约为 1.8 公斤，尺寸为 8.83 x 3.50 x 3.94 英寸。其环境规格是工作温度范围为 0 至 60 摄氏度，存储温度范围为 -40 至 100 摄氏度，相对湿度范围为 5% 至 95%，无冷凝。IC660EBR100电子装配模块的额定电压为 115 伏交流电，工作电压范围为 93 至 132 伏交流电或标称额定电压为 230 伏交流电，工作电压为 185 至 265 伏交流电。

IC660EBR100电子装配模块在 87 伏交流电压下对 115 毫安的功率电流要求，电源压降时间为 1 个周期。它的最大散热额定值为 10.1 瓦，打开 16 个输出。GE Fanuc IC660EBR100电子组件模块的最大输出电流为每个电路 2 安培，最大开关功率为 60 瓦或 125 伏安。它还为每个电路提供 2 安培（最大值）的浪涌电流，输出关断状态漏电流为 0.1 毫安。对于感性负载，它具有 20 秒内 60 个周期的全输出开关频率或 5 微秒的输出导通延迟时间。IC660EBR100电子装配模块的输出电压范围为 5 至 250 伏交流电或 5 至 220 伏直流电，以及 10 毫安的最小推荐负载。它还具有固定线圈移动电枢继电器类型。

IC660EBR100 具有16个电路继电器输出 电子装配模块

【英文介绍】

The IC660EBR100 electronic assembly module is manufactured by GE Intelligent Platform /GE Fanuc Automation. It belongs to the Genius I/O series and has 16 circuit relay outputs placed in 4 separate groups of 4 outputs each, with an LED on each circuit with a separate relay coil state. The electronic assembly weighs about 1.8 kg and measures 8.83 x 3.50 x 3.94 inches. Its environmental specifications are operating temperature range of 0 to 60 degrees Celsius, storage temperature range of -40 to 100 degrees Celsius, relative humidity range of 5% to 95%, no condensation. The IC660EBR100 electronic assembly module is rated for 115 volts AC with an operating voltage range of 93 to 132 volts AC or a nominal rated voltage of 230 volts AC with an operating voltage of 185 to 265 volts AC.

The IC660EBR100 electronic assembly module requires a power current of 115 mA at 87 volts AC and a power voltage drop time of 1 cycle. It has a maximum heat dissipation rating of 10.1 watts and opens 16 outputs. The GE Fanuc IC660EBR100 electronic component module has a maximum output current of 2 amps per circuit and a maximum switching power of 60 watts or 125 volt-amps. It also provides a surge current of 2 amps (maximum) per circuit and an output off state leakage current of 0.1 mA. For inductive loads, it has a full output switching frequency of 60 cycles in 20 seconds or an output on-delay time of 5 microseconds. The IC660EBR100 electronic assembly module has an output voltage range of 5 to 250 volts AC or 5 to 220 volts DC and a minimum recommended load of 10 MA. It also has a fixed coil moving armature relay type.

IC660EBR100 具有16个电路继电器输出 电子装配模块

【其他型号推荐】