IC660EBD120 高速计数器模块  高速输入信号

【产品详情】

该IC660EBD120是Genius I/O系列的组成部分，该系列以前由GE Fanuc Automation提供，最近被Emerson Automation收购。该组件专门用于与IC660TBD120端子底座配对的电子组件。这些组件构成了目录号为 IC660BBD120 的 I/O 模块，该模块是一个高速计数器模块，可接受开关频率高达 200 kHz 的高速输入信号。该高速计数器模块专门设计用于涡轮流量计量、仪表验证、速度测量、物料搬运和运动控制。作为电子组件IC660EBD120承载启用模块功能的电子电路。它是模块模块化方法的一部分，允许ser和工厂人员轻松安装，维护和排除模块故障，因为组件可以拆卸而无需拆卸现有电线。安装此电子组件时，必须在没有电源的情况下安装。IC660EBD120电路设计为接受 93-132 VAC 的输入电源电压范围和 47 - 63 Hz 的频率范围，而输入通道的额定值为 5VDC - 30 VDC，并接受单端 TTL、差分 TTL、非 TTL 单端和非 TTL 差分电压输入。该电子组件可容纳 12 个输入和 4 个输出，并支持 1、2 或 4 个不同复杂度的计数器的操作。电子组件与块 I/O 模块具有相同的操作、存储、相对湿度和操作振动要求，分别为 0 度至 60 摄氏度、-40 摄氏度至 100 摄氏度、5-95% 非冷凝和 5-10 Hz、2“ 或 5.088 位移。

IC660EBD120电子组件由GE Fanuc制造，作为Genius I / O系列的一部分。这是独立高速计数器模块的一部分，也是一个可配置的I / O模块，可提供高达200千赫兹的直接快速脉冲信号处理。该电子装配模块的一些典型应用包括仪表提供、速度测量、涡轮流量计、过程控制、运动控制和材料处理应用。GE Fanuc IC660EBD120电子装配模块的工作电压为 115 伏交流电或 10 至 30 伏直流电。当模块由 115 伏交流电供电时，10 至 30 伏直流电源用作备用电源。当 115 伏交流电源发生故障时，可以同时提供交流和直流电源，并且该块可以继续使用直流备用电源运行。

任何可以提供 10 至 30 伏直流输出的直流电源都可用于操作IC660EBD120电子装配块。然而，这些电源必须都符合制造商的规格。由于IC660EBD120电子装配块同时具有交流和直流电源，因此只要直流电压源不超过 20 伏，其电源就可以从交流输入获取。该块提供 1、2 或 4 个不同复杂程度的计数器。当模块激活其微处理器和通信功能时，它可以计数并提供输出，而无需与CPU通信。IC660EBD120电子组件模块带有 4 个控制输出，可提供 5 伏直流输出电压以及方波振荡器输出，可用于定时参考。

IC660EBD120 高速计数器模块  高速输入信号

【英文介绍】

The IC660EBD120 is part of the Genius I/O series, which was previously offered by GE Fanuc Automation and recently acquired by Emerson Automation. This component is specially designed for electronic components paired with the IC660TBD120 terminal base. These components form the I/O module with catalog number IC660BBD120, which is a high-speed counter module that accepts high-speed input signals with switching frequencies up to 200 kHz. This high speed counter module is specifically designed for turbine flow metering, instrument validation, speed measurement, material handling and motion control. As an electronic component, the IC660EBD120 carries the electronic circuit that enables the module function. It is part of a modular approach to modules that allows ser and plant personnel to easily install, maintain, and troubleshoot modules because components can be removed without removing existing wires. When installing this electronic component, it must be installed without power supply. The IC660EBD120 circuit is designed to accept an input supply voltage range of 93-132 VAC and a frequency range of 47-63 Hz, while the input channel is rated from 5VVDC to 30 VDC. It also accepts single-ended TTL, differential TTL, non-TTL single-ended and non-TTL differential voltage inputs. The electronic assembly can accommodate 12 inputs and 4 outputs and support the operation of 1, 2 or 4 counters of varying complexity. Electronic components have the same operating, storage, relative humidity, and operating vibration requirements as block I/O modules, with 0 to 60 degrees Celsius, -40 to 100 degrees Celsius, 5-95% non-condensing, and 5-10 Hz, 2 ", or 5.088 displacements, respectively.

The IC660EBD120 electronic assembly is manufactured by GE Fanuc as part of the Genius I/O family. This is part of a standalone high-speed counter module and a configurable I/O module that provides direct fast pulse signal processing up to 200 kilohertz. Some typical applications of this electronic assembly module include instrument provision, speed measurement, turbine flow meters, process control, motion control and material handling applications. The GE Fanuc IC660EBD120 electronic assembly module operates at 115 volts AC or 10 to 30 volts DC. When the module is powered by 115 volts AC, 10 to 30 volts DC power is used as backup power. In the event of a 115 volt AC power failure, both AC and DC power can be provided, and the block can continue to operate with DC backup power.

Any DC power supply that can provide a 10 to 30 volt DC output can be used to operate the IC660EBD120 electronic assembly block. However, these power supplies must all meet the manufacturer's specifications. Since the IC660EBD120 electronic assembly block has both AC and DC power supplies, its power supply can be obtained from the AC input as long as the DC voltage source does not exceed 20 volts. The block provides 1, 2, or 4 counters of varying complexity. When the module activates its microprocessor and communication functions, it can count and provide output without having to communicate with the CPU. The IC660EBD120 electronic assembly module comes with 4 control outputs that provide 5 volts DC output as well as a square wave oscillator output for timing reference.

IC660EBD120 高速计数器模块  高速输入信号

【其他型号推荐】