IC660EBD110 离散输入模块 分立输入功能

【产品详情】

IC660EBD110是一个电子组件，是IC660BBD110十六 （16） 点、93-132 VAC 离散输入模块的组件。该电子组件以前由GE Fanuc Automation制造，但最近被艾默生自动化收购。作为电子组件，该组件承载必要的电路以实现分立输入功能。该IC660EBD110专门承载电压检测电路、电阻/电容网络以及输入和输出的隔离电路。它与提供输入信号端点的端子基座配对。与此电子组件一起使用的兼容端子底座是IC660TBD110。该IC660EBD110具有十六 （16） 个离散输入通道，可接受 93-132 VAC、47-63 Hz 的输入信号电压范围。模块对地或串行总线隔离的输入额定电压为1500 V。该电子组件能够检测输入开路和短路线，这些导线报告给 CPU，并通过单元 OK LED 在本地指示。此外，该电子组件具有支持 I/O 的 LED 和 16 个代表每个输入通道的独立 LED。输入通道的典型处理时间为 1 ms，配置的滤波时间（例如 10 到 100 ms）会增加延迟，可以以 10 ms 为增量进行配置。IC660EBD110的工作温度为 0 至 60 摄氏度;储存温度为-40至100摄氏度;相对湿度为 5-95%，无冷凝，工作振动为 5-10 Hz、2“ 或 5.088 位移。当设备中没有电源时，必须安装电子组件，因为此组件不支持带电拆卸和插入 （RIUP）。

IC660EBD110电子组件是一种电子组件，具有16个仅输入的电路，GE Fanuc将其作为Genius I / O设备系列的一部分进行制造。它的工作电压范围为 93 至 132 伏交流电，在所有 28 个输入通电并施加全电流的情况下，最大散热额定值为 16 瓦。电子组件的频率范围为 47 至 63 赫兹，电子组件所需的功率仅为 80 毫安的最大设备电流，另外是 200 毫安的最大输入电路电流。其他值得注意的规格包括 1500 V 的输入对地隔离额定值、5 A 的端子板额定值以及每个电路上的 LED，用于显示逻辑侧输入的状态。

GE Fanuc IC660EBD110电子组件重约1.8公斤，尺寸为8.83 x 3.50 x 3.94英寸。它还具有 0 至 60 摄氏度的工作温度范围和 -40 至 100 摄氏度的存储温度范围以及 5% 至 95% 的非冷凝可耐受湿度范围。IC660EBD110电子组件具有阻性输入电路，阻性负载足以激活 2 线接近开关器件。该模块的输入电阻为 11.6 kohms，在 9 伏的额定电压下提供 9.115 毫安的预载电流。IC660EBD110电子组件的每个电路都有其LED指示灯，该指示灯显示存在开和关阈值电压。该电子组件使用 16 个输入基准，位值为 1，表示输入等于或高于配置的阈值电压。

IC660EBD110 离散输入模块 分立输入功能

【英文介绍】

The IC660EBD110 is an electronic assembly that is a component of the IC660BBD110 sixteen (16) point, 93-132 VAC discrete input module. The electronics component was previously manufactured by GE Fanuc Automation, but was recently acquired by Emerson Automation. As an electronic component, the component carries the necessary circuits to achieve discrete input functions. The IC660EBD110 is designed to carry voltage detection circuits, resistance/capacitance networks, and isolation circuits for input and output. It is paired with a terminal base that provides an input signal endpoint. The compatible terminal base used with this electronic assembly is IC660TBD110. The IC660EBD110 has sixteen (16) discrete input channels and can accept input signal voltage ranges of 93-132 VAC and 47-63 Hz. The input voltage rating for module to ground or serial bus isolation is 1500 V. This electronic component is capable of detecting input open and short routes, which are reported to the CPU and indicated locally via the unit OK LED. In addition, the electronic assembly has leds that support I/O and 16 separate leds representing each input channel. The typical processing time of the input channel is 1 ms, and the configured filtering time (for example, 10 to 100 ms) increases the latency and can be configured in 10 ms increments. IC660EBD110 operating temperature is 0 to 60 degrees Celsius; Storage temperature -40 to 100 degrees Celsius; The relative humidity is 5-95%, there is no condensation and the operating vibration is 5-10 Hz, 2 "or 5.088 displacement. When there is no power supply in the device, an electronic component must be installed because this component does not support live removal and insertion (RIUP).

The IC660EBD110 electronic assembly is an electronic assembly with 16 input-only circuits that GE Fanuc manufactures as part of the Genius I/O device family. It operates in a voltage range of 93 to 132 volts AC and has a maximum heat dissipation rating of 16 watts when all 28 inputs are energized and full current is applied. The frequency range of the electronic components is 47 to 63 Hz, and the power required for the electronic components is only a maximum device current of 80 mA, plus a maximum input circuit current of 200 mA. Other notable specifications include A 1500 V input to ground isolation rating, a 5 A terminal board rating, and leds on each circuit to display the status of the logical side input.

The GE Fanuc IC660EBD110 electronic assembly weighs approximately 1.8 kg and measures 8.83 x 3.50 x 3.94 inches. It also has an operating temperature range of 0 to 60 degrees Celsius and a storage temperature range of -40 to 100 degrees Celsius, as well as a non-condensing tolerable humidity range of 5 to 95 percent. The IC660EBD110 electronic assembly has a resistive input circuit with a resistive load sufficient to activate the 2-wire proximity switching device. The module has an input resistance of 11.6 kohms and provides a preload current of 9.115 mA at a rated voltage of 9 volts. Each circuit of the IC660EBD110 electronic assembly has its LED indicator that indicates the presence of an on and off threshold voltage. The electronic component uses 16 input benchmarks with a bit value of 1, indicating that the input is equal to or higher than the configured threshold voltage.

IC660EBD110 离散输入模块 分立输入功能

【其他型号推荐】