IC660EBD021 GE  I/O模块该电子组件专门与端子基座一起使用

【产品详情】

该IC660EBD021是Genius I/O Block系列的一部分，该系列以前由GE Fanuc Automation制造，现在隶属于艾默生自动化。该电子组件专门与端子基座一起使用，IC660TSD020或IC660TSD023形成功能块I/O模块，如IC660BBD021,24/48 VDC 16通道组合离散输入和输出，以及IC660BBD023,24 VDC 16通道组合离散输入输出模块。IC660EBD021承载十六 （16） 个灌电流/拉电流 I/O 电路，设计用于接收 24 / 48 输入电压。输入和输出电路均配有状态 LED 指示灯，当特定通道激活时，指示灯会通电。该电子电路还负责通过背板以及电源端子与处理器通信，以接收 5 VD 背板电源。该IC660EBD021理想地用作功能IC660BBD021和IC660BBD023 I/O 模块的备件。在更换电子组件期间，必须断开模块电源，以消除可能损坏附近电子元件的电弧的可能性。另外，切勿触摸电子部件并将其放在接地物体上一段时间以释放静电。在现场工作时，将模块放在防静电袋中或接地台的顶部。该电子组件还承载通信接口，模块利用该接口与网络内的设备（如中央可编程逻辑控制器（PLC））交换数据。它支持Genius I / O协议，这是一种多点，ling距离和高速通信协议。

IC660EBD021 I/O模块是由GE智能平台/GE Fanuc制造的16电路DC I/O模块，是GE Genius I/O系列的一部分。该模块是一个智能、可配置的模块，可用于与各种分立式直流执行器和传感器连接。它还包括 2 个直流供电的 16 电路源，为现场输出设备提供电流。IC660EBD021 16 电路灌电流或源极 I/O 模块带有 16 个隔离电路，可配置为输出、输入或三态输入。输出电路可以连接到输入电路，而无需使用任何其他组件或逻辑状态反转。该装置具有可配置的功能，例如输出脉冲测试功能、输出上电默认值以及 10 至 100 微秒的可选输入滤波时间。它还具有输出保持最后状态或默认配置功能。

GE Fanuc IC660EBD021 I/O 块具有可以识别安装触发器和运行时错误的诊断程序。该模块的诊断功能包括开关故障检测、过热保护、过载检测和关断、空载检测以及三态输入的开路检测。GE Fanuc IC660EBD021 I/O 模块重约 4 磅或 1.8 千克，其散热额定值为 68.8 瓦，所有 16 个输出均以 2 安培的电流上电。直流电源所需的电流典型值为 150 毫安，最大值为 200 毫安。电源压降时间为 10 微秒。当它处于导通状态时，额定电压为 24 伏直流电源电压，源模块电压范围为 16 至 24 伏直流，灌电流块电压范围为 0 至 8 伏直流。

IC660EBD021 GE  I/O模块该电子组件专门与端子基座一起使用

【英文介绍】

The IC660EBD021 is part of the Genius I/O Block series, which was previously manufactured by GE Fanuc Automation and is now part of Emerson Automation. This electronic assembly is specially used with the terminal base, IC660TSD020 or IC660TSD023 forms a functional block I/O module, such as IC660BBD021,24/48 VDC 16-channel combined discrete input and output, And IC660BBD023, 24-VDC 16-channel combined discrete input/output module. The IC660EBD021 carries sixteen (16) feed/pull current I/O circuits and is designed to receive 24/48 input voltages. The input and output circuits are equipped with status LED indicators that are energized when a particular channel is activated. The electronic circuit is also responsible for communicating with the processor through the backplane as well as the power terminal to receive 5 VD backplane power. The IC660EBD021 is ideally used as a spare part for functional IC660BBD021 and IC660BBD023 I/O modules. During the replacement of electronic components, the module power supply must be disconnected to eliminate the possibility of arcing that could damage nearby electronic components. Also, do not touch electronic parts and place them on a grounded object for a period of time to release static electricity. When working on site, place the module in an ESD bag or on the top of the ground console. This electronic component also hosts the communication interface, which the module uses to exchange data with devices within the network, such as a central Programmable logic controller (PLC). It supports the Genius I/O protocol, which is a multi-point, ling distance and high-speed communication protocol.

The IC660EBD021 I/O module is a 16-circuit DC I/O module manufactured by GE Intelligent Platform /GE Fanuc as part of the GE Genius I/O family. The module is a smart, configurable module that can be used to connect with a variety of discrete DC actuators and sensors. It also includes 2 DC-powered 16-circuit sources that provide current to field output devices. IC660EBD021 16 Circuit The feed current or source I/O module has 16 isolation circuits that can be configured as output, input, or tri-state inputs. The output circuit can be connected to the input circuit without the use of any other components or logical state reversal. The device has configurable features such as an output pulse test function, an output power-on default, and an optional input filtering time of 10 to 100 microseconds. It also has the function of output keeping the last state or default configuration.

The GE Fanuc IC660EBD021 I/O block has a diagnostic that recognizes installation triggers and runtime errors. The diagnostic functions of the module include switch fault detection, overheat protection, overload detection and shutdown, no-load detection and three-state input open circuit detection. The GE Fanuc IC660EBD021 I/O module weighs about 4 pounds or 1.8 kilograms, has a heat dissipation rating of 68.8 watts, and all 16 outputs are powered at 2 amps. The typical current required for a DC power supply is 150 mA, with a maximum of 200 mA. The power supply voltage drop time is 10 microseconds. When it is on, the rated voltage is 24 volts DC supply voltage, the source module voltage range is 16 to 24 volts DC, and the fill current block voltage range is 0 to 8 volts DC.

IC660EBD021 GE  I/O模块该电子组件专门与端子基座一起使用

【其他型号推荐】