IC660EBD020 GE 24/48 VDC离散输入和输出I / O模块

【产品详情】

IC660EBD020是与IC660TSD020端子基座一起使用的电子组件，用于形成Genius I/O 16通道，24/48 VDC离散输入和输出I / O模块。这些组件以前由GE Fanuc Automation制造，现在隶属于艾默生自动化。IC660EBD020包含用于处理转发到模块通道的场电压信号的电子电路。该电子组件包含 RC 缓冲电路、智能开关和用于指示通道状态的发光二极管 （LED）。它还提供与背板的连接，在该背板上取电并实现与合作伙伴控制器的数据交换。该IC660EBD020提供十六 （16） 个离散输入通道，设计用于在 16-24 VDC 的输入电压信号范围内以 1.7 ms 的处理速度加上配置的信号延迟进入 ON 状态。相反，输出通道能够在 2 ms 持续时间内为每个电路产生 10 安培，最大浪涌电流为 10 安培。I/O 模块在 15 摄氏度时产生的总输出电流为 35 安培，而最大开关频率为每秒一次。可用的输入诊断包括开路、过热和开关故障检测，而输出诊断包括短路、过载、空载、开关故障和过热。电子组件的工作温度要求为0至60摄氏度，存储温度为-40摄氏度至100摄氏度，相对湿度为5-95%，无冷凝。IC660EBD020工作振动为 5-10 Hz，可接受的排量高达 2“ 或 5.088。

IC660EBD020是IC660BBD022电路源I/O模块的电子组件。这两个部件均由GE Fanuc Automation设计，并包含在Genius系列GE I / O模块中。此特定型号包括 16 个离散输入和输出。该模块可与2种不同类型的传感器一起使用，例如3线固态传感器和机电传感器。该模块可以提供和接收来自这些特定输出设备的电流。GE Fanuc自动化IC660EBD020电子组件包括该模块的所有电路和电子组件。模块中存在的电路可以配置为输入、三态输入或输出，具体取决于手头应用的要求。

GE Fanuc自动化IC660EBD020电子组件具有可配置的功能，有助于改善I / O模块操作。例如，它提供输出脉冲测试功能和可选的输入滤波时间。其他功能包括 CPU 冗余和输出的保持最后状态功能。该模块的输入处理时间为 5600 欧姆。GE Fanuc自动化IC660EBD020电子组件与Genius总线控制器，PCIM和QBIM模块以及Genius手持显示器兼容。它在 18 至 56 伏直流电压范围内工作，最大纹波为 10%。该模块所需的直流功率典型值为 150 毫安，最大值为 300 毫安。它可以在最高温度为60摄氏度的环境中使用。该模块的散热额定值为 68.8 瓦，块到块的隔离为 1500 伏。

IC660EBD020 GE 24/48 VDC离散输入和输出I / O模块

【英文介绍】

The IC660EBD020 is an electronic component used with the IC660TSD020 terminal base to form Genius I/O 16-channel, 24/48 VDC discrete input and output I/O modules. These components were previously manufactured by GE Fanuc Automation and are now part of Emerson Automation. The IC660EBD020 contains an electronic circuit for processing the field voltage signal that is forwarded to the module channel. The electronic assembly consists of an RC buffer circuit, a smart switch, and a light emitting diode (LED) for indicating the status of the channel. It also provides a connection to the backplane where power is taken and data is exchanged with partner controllers. The IC660EBD020 provides sixteen (16) discrete input channels and is designed to enter the ON state at a processing speed of 1.7 ms plus configured signal delay over an input voltage signal range of 16-24 VDC. In contrast, the output channel is capable of generating 10 amps per circuit over a 2 ms duration, with a maximum surge current of 10 amps. The I/O module generates a total output current of 35 amps at 15 degrees Celsius, while the maximum switching frequency is once per second. Available input diagnostics include open circuit, overheat, and switch fault detection, while output diagnostics include short circuit, overload, no-load, switch fault, and overheat. The operating temperature of the electronic components is required to be 0 to 60 degrees Celsius, the storage temperature is -40 to 100 degrees Celsius, the relative humidity is 5-95%, and there is no condensation. The IC660EBD020 operates at 5-10 Hz with acceptable displacement up to 2 "or 5.088.

The IC660EBD020 is an electronic component of the IC660BBD022 circuit source I/O module. Both components are designed by GE Fanuc Automation and are included in the Genius family of GE I/O modules. This particular model includes 16 discrete inputs and outputs. The module can be used with 2 different types of sensors, such as 3-wire solid-state sensors and electromechanical sensors. The module can provide and receive current from these specific output devices. GE Fanuc Automation IC660EBD020 Electronic Components includes all circuits and electronic components of the module. The circuits present in the module can be configured as inputs, three-state inputs, or outputs, depending on the requirements of the application at hand.

The GE Fanuc Automation IC660EBD020 electronics assembly has configurable features to help improve I/O module operation. For example, it provides output pulse testing capabilities and optional input filtering times. Other features include CPU redundancy and the ability to maintain the last state of the output. The input processing time of this module is 5600 ohms. GE Fanuc Automation IC660EBD020 electronics components are compatible with Genius Bus controllers, PCIM and QBIM modules, and Genius handheld displays. It operates in the 18 to 56 VDC voltage range with a maximum ripple of 10%. The typical DC power required for this module is 150 mA, with a maximum of 300 mA. It can be used in an environment with a maximum temperature of 60 degrees Celsius. The module has a heat dissipation rating of 68.8 watts and a block-to-block isolation of 1500 volts.

IC660EBD020 GE 24/48 VDC离散输入和输出I / O模块

【其他型号推荐】