IC660EBA106 电流源输入模块组件 具有不同的功能 GE 

【产品详情】

IC660EBA106输入模块组件是仅包括电子组件的电流源输入模块组件。该电子组件属于GE Genius I / O系列，由GE Fanuc Automation设计和制造。该电子组件用于将控制器连接到提供不同类型信号的不同设备。这些信号是模拟信号，范围从 4 毫安到 20 毫安。该模块电子组件提供 6 个输出，这些输出的额定值支持这些信号，并提供与模块中不同电路隔离的电流环路。块状电子组件的电路是输入 1 共有的 BSM 电路，但同时电路是隔离的。

GE Fanuc自动化IC660EBA106电子组件是一种电流源输入块电子组件，具有不同的功能，例如能够将电路值缩放到工程值，CPU冗余以及输入转换时间的改进。这些功能有助于电路与连接到它们的不同设备一起更好地运行。GE Fanuc自动化IC660EBA106电流源输入模块电子组件具有故障报告功能，包括不同类型的低和高报警。这些故障报告还包括输入超量程和欠量程报告，以及输入电流降至 2 毫安以下时的警报。GE Fanuc自动化IC660EBA106电子组件的软件将取决于所使用的设备。默认情况下，它需要一个手持显示器，如果要与GE系列5和6 PLC一起使用，则需要4.02和2.01或更高版本的Logicmaster软件才能正常运行。

IC660EBA106 电流源输入模块组件 具有不同的功能 GE 

【英文介绍】

The IC660EBA106 input module assembly is a current source input module assembly that includes only electronic components. The electronics are part of the GE Genius I/O family and are designed and manufactured by GE Fanuc Automation. This electronic component is used to connect the controller to different devices that provide different types of signals. These signals are analog and range from 4 mah to 20 mah. The module electronics assembly provides 6 outputs that are rated to support these signals and provide a current loop that is isolated from the different circuits in the module. The circuit of the block electronic component is a common BSM circuit of input 1, but at the same time the circuit is isolated.

The GE Fanuc Automation IC660EBA106 electronic assembly is a current source input block electronic assembly with different features, such as the ability to scale circuit values to engineering values, CPU redundancy, and improvements in input conversion time. These features help circuits function better with the different devices connected to them. GE Fanuc Automation IC660EBA106 Current source Input module Electronic components with fault reporting capabilities, including different types of low and high alarms. These fault reports also include input overrange and underrange reports, as well as alerts when the input current drops below 2 mah. The software for GE Fanuc to automate the IC660EBA106 electronic components will depend on the device being used. By default, it requires a handheld display, and if it is to be used with GE series 5 and 6 PLCS, Logicmaster software versions 4.02 and 2.01 or later are required to function properly.

IC660EBA106 电流源输入模块组件 具有不同的功能 GE 

【其他型号推荐】