IC660EBA104  I/O组合输入和输出模块 电子组件

【产品详情】

IC660EBA104是一个电子组件模块，是Genius I/O组合输入和输出模块的一部分，特别是四（4）个0-20 mA / 4-20 mA和两（2）个0-20 mA / 4-20 mA电流信号。Genius I/O系列，前身为GE Fanuc Automation，现隶属于艾默生自动化，是一种模块化的分布式I/O组件，旨在实现经济高效、高效的I/O集成解决方案。由于该系列中的重要模块组件能够单独分离和更换，因此故障排除和维护很容易执行，尤其是在需要高可用性或更少停机时间的应用中。作为电子装配组件，该模块承载转换器、隔离器、多路复用器、输入滤波器和诊断电路。转换器电路本质上是用于输入的模数转换器（ADC）和用于输出的数模转换器（DAC）。接收到的模拟信号被转换为高分辨率数字格式，而要生成的信号被返回到模拟值并提供给终端基座。隔离器电路提供额定电压为1500 V的块间隔离，持续1分钟，提供额定值为300 V的组间隔离。输入滤波器用于调理接收到的信号，消除噪声和波动，而诊断电路提供欠量程、超量程和反馈误差检测功能。IC660EBA104与其他组件具有相同的操作、存储温度和相对湿度要求，具体而言，工作温度为 0 度至 60 摄氏度，存储温度为 -40 摄氏度至 100 摄氏度，相对湿度为 5-95%，无冷凝。

IC660EBA104 I/O模块是由GE Fanuc Automation在GE Genius I/O系列中设计的电流源模拟I/O模块电子组件。该部件仅包括模块的电子组件，该模块连接到端子组件以形成完整的I / O模块。该电子组件包括提供模块主要功能所需的所有内部组件。该模块用于为系统中的不同电路提供隔离电源。GE Fanuc自动化IC660EBA104 I/O模块电子组件提供的一些功能包括输入报警检测，输出反馈检查和CPU冗余功能。它还可以执行诊断活动，包括输入开路检测、输出超量程以及欠量程和输出反馈错误诊断。

GE Fanuc自动化IC660EBA104电流源模拟输入/输出模块电子组件与GE Genius I/O系列的所有总线控制器，PCIM设备和QBIM设备兼容。只要满足某些要求，它还与6系列和5 GE PLC兼容。I/O 模块和电子组件仅与额定电压为 24 至 48 伏直流的总线开关模块兼容。GE Fanuc Automation IC660EBA104 I/O 模块电子组件使用额定交流电 92 至 132 伏交流电、频率为 47 至 63 赫兹的交流电源以及额定直流电压为 105 至 145 伏直流电的直流电源运行，最大纹波为 10%。交流和直流电压的最大额定电流分别为 150 毫安和 140 毫安。该电子组件的热漂移为每摄氏度 70 PPM。

IC660EBA104  I/O组合输入和输出模块 电子组件

【英文介绍】

The IC660EBA104 is an electronic component module that is part of the Genius I/O combined input and output module, specifically four (4) 0-20 mA / 4-20 mA and two (2) 0-20 mA / 4-20 mA current signals. The Genius I/O family, formerly GE Fanuc Automation and now part of Emerson Automation, is a modular distributed I/O component designed to enable cost-effective and efficient I/O integration solutions. Because important modular components in the series can be separated and replaced separately, troubleshooting and maintenance are easy to perform, especially in applications that require high availability or less downtime. As an electronic assembly component, the module hosts converters, isolators, multiplexers, input filters, and diagnostic circuits. A converter circuit is essentially an analog-to-digital converter (ADC) for input and a digital-to-analog converter (DAC) for output. The received analog signal is converted into a high-resolution digital format, while the signal to be generated is returned to the analog value and fed to the terminal base. The isolator circuit provides interblock isolation rated at 1500 V for 1 minute and intergroup isolation rated at 300 V. The input filter is used to condition the received signal, eliminating noise and fluctuations, while the diagnostic circuit provides underrange, overrange, and feedback error detection. The IC660EBA104 has the same operating, storage temperature and relative humidity requirements as the other components, specifically operating temperatures of 0 ° C to 60 ° C, storage temperatures of -40 ° C to 100 ° C, relative humidity of 5-95% and no condensation.

The IC660EBA104 I/O module is a current source analog I/O module electronic assembly designed by GE Fanuc Automation in the GE Genius I/O family. This part consists only of the electronic component of the module, which is connected to the terminal assembly to form a complete I/O module. The electronic assembly includes all internal components required to provide the main functions of the module. This module is used to provide isolated power to different circuits in the system. Some of the features offered by the GE Fanuc Automation IC660EBA104 I/O module electronics components include input alarm detection, output feedback checking and CPU redundancy. It can also perform diagnostic activities, including input open circuit detection, output overrange and underrange, and output feedback error diagnosis.

GE Fanuc Automation IC660EBA104 Current Source Analog input/Output module Electronic components are compatible with all bus controllers, PCIM devices and QBIM devices in the GE Genius I/O family. It is also compatible with the 6 Series and 5 GE PLCS as long as certain requirements are met. I/O modules and electronic components are only compatible with bus switch modules rated for 24 to 48 volts DC. GE Fanuc Automation IC660EBA104 I/O module The electronic components operate with AC rated from 92 to 132 volts, AC power rated from 47 to 63 Hertz, and DC power rated from 105 to 145 volts DC. The maximum ripple is 10%. The maximum rated current for AC and DC voltages is 150 mA and 140 mA respectively. This electronic component has a thermal drift of 70 PPM per degree Celsius.

IC660EBA104  I/O组合输入和输出模块 电子组件

【其他型号推荐】