IC660EBA103  热电偶模块输入模块GE 

【产品详情】

IC660EBA103是Genius I/O热电偶模块输入模块的模块化组件。该组件是一个电子组件，与IC660TBA103端子底座一起使用，该端子底座包括IC660BBA103热电偶输入和输出模块。该成型 I/O 模块与热电偶和电压发生器兼容，可接受 -25 至 +150 mV 的输入电压范围，在 8 摄氏度下测量精度为 25 Hz。Genius Block I/O以前隶属于GE Fanuc Automation，现在由Emerson Automation负责。这些是模块化 I/O 平台，主要用于实现分布式 I/O 架构。该系列采用模块化设计，允许逐个更换和维修组件。借助此功能，模块维护得到简化，并有效减少了停机时间，因为可以维护现有电线并且组件易于安装。IC660EBA103提供电子电路，即模数转换器 （ADC）、模块至背板隔离和通道组隔离电路，额定值分别为 1500 VAC （单分钟）和 300 V。它还具有多路复用器电路，该电路穿插两个主热电偶输入时间和输入滤波器。该电子组件设计用于 93-123 VAC、47-63 Hz（9 瓦功率）和 115 VAC 或 105-145 VDC 的电源电压范围，在 10 瓦功率下具有 9% 的纹波，而标称电压为 125 VDC。该模块的工作温度为0度至60摄氏度;储存温度为-40摄氏度至100摄氏度;相对湿度 5-95%，非冷凝和工作振动为 5-10 Hz，2“ 或 5.088 位移。

该IC660EBA103是一种电子组件，是GE Fanuc Automation的Genius I / O系列热电偶块的一部分。该组件为分为6组的3个热电偶兼容输入的正确运行提供了电子元件。这种类型的模块主要用于监控温度输入和测量低电平输入信号。3 个输入组中的每一个都是隔离的，每个输入组包含 2 个热电偶输入电路和 2 个远程冷端输入类型的补偿输入。GE Fanuc自动化IC660EBA103电子组件可以执行不同的诊断。这些诊断包括内部故障检测、开路检测以及高输入和低输入报警诊断。

GE Fanuc自动化IC660EBA103电子组件与PCIM和QBIM模块高度兼容。对于这些连接，需要 3.5 或更高版本的手持显示器软件。组件所属的模块还与GE系列90-70 PLC，系列6 PLC和系列5 PLC兼容。对于这些 PLC，CPU 必须分别是修订版 2 或更高版本、修订版 105 或更高版本以及修订版 3.0 或更高版本。该模块的最大散热额定值为 9 瓦，块到块的隔离为 1500 伏/分钟。

IC660EBA103  热电偶模块输入模块GE 

【英文介绍】

The IC660EBA103 is a modular component of the Genius I/O thermocouple module input module. The assembly is an electronic assembly for use with the IC660TBA103 terminal base, which includes the IC660BBA103 thermocouple input and output modules. The molded I/O module is compatible with thermocouples and voltage generators and can accept input voltage ranges from -25 to +150 mV, with measurement accuracy of 25 Hz at 8 degrees Celsius. Genius Block I/O was formerly owned by GE Fanuc Automation and is now owned by Emerson Automation. These are modular I/O platforms that are primarily used to implement distributed I/O architectures. The series features a modular design that allows components to be replaced and serviced one by one. With this feature, module maintenance is simplified and downtime is effectively reduced, as existing wires can be maintained and components are easy to install. The IC660EBA103 offers electronic circuits, namely analog-to-digital converters (ADCs), module-to-backplane isolation and channel bank isolation circuits, rated at 1500 VAC (single minute) and 300 V, respectively. It also has a multiplexer circuit that intersperses two main thermocouple input times and an input filter. Designed for use in supply voltage ranges of 93-123 VAC, 47-63 Hz (9 watts of power) and 115 VAC or 105-145 VDC, the electronic assembly has a 9% ripple at 10 watts of power compared to a nominal voltage of 125 VDC. The operating temperature of the module is 0 ° C to 60 ° C; The storage temperature is -40 ° C to 100 ° C; Relative humidity is 5-95%, non-condensing and operating vibration is 5-10 Hz, 2 "or 5.088 displacement.

The IC660EBA103 is an electronic assembly that is part of GE Fanuc Automation's Genius I/O series of thermocouple blocks. This assembly provides the electronics for the correct operation of 3 thermocouple compatible inputs divided into 6 groups. This type of module is mainly used to monitor temperature input and measure low-level input signals. Each of the 3 input groups is isolated, and each input group contains 2 thermocouple input circuits and 2 compensation inputs of the remote cold end input type. The GE Fanuc Automated IC660EBA103 electronic assembly can perform different diagnostics. These diagnostics include internal fault detection, open circuit detection, and high - and low-input alarm diagnosis.

GE Fanuc Automation IC660EBA103 electronics components are highly compatible with PCIM and QBIM modules. For these connections, a handheld display software version 3.5 or higher is required. The modules the components belong to are also compatible with GE Series 90-70 PLCS, Series 6 PLCS and Series 5 PLCS. For these PLCS, the CPU must be revision 2 or higher, revision 105 or higher, and revision 3.0 or higher, respectively. The module has a maximum heat dissipation rating of 9 watts and block to block isolation of 1500 volts/min.

IC660EBA103  热电偶模块输入模块GE 

【其他型号推荐】