IC660EBA100 GE 模拟 I/O 块运行的电子组件 

【产品详情】

GE IC660EBA100电子组件是一种使用特定 GE 模拟 I/O 块运行的电子组件。这两种设备都是由GE Fanuc Automation设计和分销的。这种特殊的电子组件以 115 伏交流电的标称块额定功率运行，工作电压范围为 98 至 132 伏交流电。该模块的最大额定功率为 10 VA。值得一提的是，GE Fanuc自动化IC660EBA100电子组件提供了I/O模块在任何兼容应用中运行所需的所有电子部件。使用此电子组件时，它将需要一个端子组件套件，其中包含其运行所需的所有连接和端口。

GE Fanuc自动化IC660EBA100电子组件支持带有4个输入电路和2个输出电路的模块。该模块配有 2 个 LED，可提供设备的状态更新和 I/O 连接的状态。整个模块的块间隔离额定值为 1500 伏，散热额定值为 6 瓦。重要的是将GE Fanuc自动化IC660EBA100电子组件安装在一个干净的区域，其中没有任何危险材料。该环境的温度不得超出 0 至 60 摄氏度的范围，相对湿度水平应在 5% 至 95% 之间。块的热漂移为每摄氏度 10 PPM（典型值）。最大热漂移为每摄氏度 40 PPM。该模块的输出分辨率为 12 位加号，输出更新频率为 4 毫秒。该块的输出负载为 2000 欧姆或更大。

IC660EBA100 GE 模拟 I/O 块运行的电子组件 

【英文介绍】

The GE IC660EBA100 electronic component is an electronic component that operates using a specific GE analog I/O block. Both devices are designed and distributed by GE Fanuc Automation. This special electronic assembly operates at a nominal block rating of 115 volts AC, with an operating voltage range of 98 to 132 volts AC. The module has a maximum rated power of 10 VA. It is worth mentioning that the GE Fanuc Automation IC660EBA100 electronic Assembly provides all the electronic components needed for an I/O module to operate in any compatible application. When using this electronic component, it will require a kit of terminal components that contains all the connections and ports it needs to operate.

The GE Fanuc Automation IC660EBA100 electronics assembly supports modules with 4 input circuits and 2 output circuits. The module is equipped with 2 leds that provide status updates of the device and status of the I/O connection. The entire module has an interblock isolation rating of 1500 volts and a heat dissipation rating of 6 watts. It is important to install the GE Fanuc Automation IC660EBA100 electronic assembly in a clean area where there are no hazardous materials. The temperature of the environment should not exceed the range of 0 to 60 degrees Celsius, and the relative humidity level should be between 5% and 95%. The thermal drift of the block is 10 PPM per degree Celsius (typical value). The maximum thermal drift is 40 PPM per degree Celsius. The module has an output resolution of 12 bit plus signs and an output update frequency of 4 milliseconds. The output load of this block is 2000 ohms or greater.

IC660EBA100 GE 模拟 I/O 块运行的电子组件 

【其他型号推荐】