IC660EBA021  I/O 模块电阻式温度检测器

【产品详情】

GE Fanuc IC660EBA021 Genius I/O 模块电子组件是为 GE Genius I/O RTD（电阻式温度检测器）输入模块制造的。IC660EBA021电子组件可以与端子组件一起订购，作为完整的工厂组装模块，也可以单独订购为具有 6 个输入通道的单个电子组件。IC660EBA021电子组件有 6 个输入电路，分为 3 组，每组 2 个，每组之间隔离高达 300 伏。每个IC660EBA021电子组件输入都与镍、铜或铂电阻温度检测器（RTD）兼容，并且来自每个输入通道的输入数据针对所选的RTD类型进行线性化。IC660EBA021电子组件经过工厂校准，无需额外的现场校准。它具有内置诊断和保护功能，包括开路检测、欠量程/超量程检测、短路检测、故障检测和错误检测，可实现平稳运行。

IC660EBA021电子组件的块电压范围为 18.0 至 56.0 伏直流，最大额定功率为 7.0 瓦。其 6 个 iinput 通道具有 0.1 摄氏度的分辨率和 +/-1.0 摄氏度（铂或镍 RTD）和 +/-10 摄氏度（铜 RTD）的绝对精度值。IC660EBA021电子组件具有可选的输入更新和滤波时间（400 毫秒、800 毫秒或 1600 毫秒），电阻测量范围为 0 至 5000 欧姆。IC660EBA021电子组件以十分之一摄氏度、华氏度、欧姆或计数格式将数据发送到 CPU。IC660EBA021电子组件可以安装在端子组件底座上，方法是将其完美地对准底座，并用端子组件顶部和底部的固定螺钉牢固地固定。

IC660EBA021  I/O 模块电阻式温度检测器

【英文介绍】

GE Fanuc IC660EBA021 Genius I/O Module Electronic components are manufactured for GE Genius I/O RTD (Resistive Temperature Detector) input modules. The IC660EBA021 electronic assembly can be ordered together with the terminal assembly as a complete factory-assembled module or separately as a single electronic assembly with 6 input channels. The IC660EBA021 electronic assembly has 6 input circuits, divided into 3 groups of 2, with up to 300 volts of isolation between each group. Each IC660EBA021 electronic component input is compatible with a nickel, copper, or platinum resistance temperature detector (RTD), and the input data from each input channel is linearized for the selected RTD type. The IC660EBA021 electronic components are factory calibrated and require no additional on-site calibration. It has built-in diagnostic and protection features including open circuit detection, underrange/overrange detection, short circuit detection, fault detection and error detection for smooth operation.

The IC660EBA021 electronic assembly has a block voltage range of 18.0 to 56.0 volts DC with a maximum power rating of 7.0 watts. Its six iinput channels have a resolution of 0.1 degrees Celsius and absolute accuracy values of +/-1.0 degrees Celsius (platinum or nickel RTD) and +/-10 degrees Celsius (copper RTD). The IC660EBA021 electronic assembly has optional input update and filtering times (400 ms, 800 ms or 1600 ms) and resistance measurement ranges from 0 to 5000 ohms. The IC660EBA021 electronic assembly sends data to the CPU in one-tenth of a degree Celsius, Fahrenheit, ohm, or count format. The IC660EBA021 electronic assembly can be mounted on the base of the terminal assembly by perfectly aligning it with the base and securely securing it with the setting screws at the top and bottom of the terminal assembly.

IC660EBA021  I/O 模块电阻式温度检测器

【其他型号推荐】