531X191RTBAFG4 继电器端子板 执行控制功能

【产品详情】

通用电气 531X191RTBAFG4 是 531X 替换板系列的继电器端子板。GE品牌的大多数驱动器都能够接受此卡并依赖其功能。该板安装在驱动器中时具有双重用途。通过卡提供七个继电器，用于命令外部连接的电路。用户还可以使用端子板访问系统集成线圈和触点。

卡的功能是已安装驱动器的有用功能。工作时，该板可以对连接到七个继电器的任何外部电路执行控制功能。531X191RTBAFG4 还可用于将 RTB 点和继电器触点制成表格。该卡的 G4 修订版、线圈和触点适用于该系列的这一部分。24 VDC 时电路板速率的线圈± 10%，或 37 mA。此卡中的触点额定电流为 2.4 A，额定电压为 125 VAC 或 28 VDC。这些触点还具有每 1.0 V 额定值 1 mA。

电路板完整性取决于用户是否遵循通用电气概述的所有安装参数。 只允许合格的人员处理和安装这些板。如果电路板处理、安装或接线不当，可能会导致损坏。此卡的接线指南可在 531X191RTBAFG4 继电器手册和数据表中找到。制造商通用电气是该板技术支持的原始提供商。

531X191RTBAFG4 继电器端子板 执行控制功能

【英文介绍】

The GE 531X191RTBAFG4 is a relay terminal board for the 531X replacement board family. Most drives under the GE brand are able to accept this card and rely on its functionality. The board has dual use when installed in a drive. Seven relays are provided through the card to command externally connected circuits. Users can also use the terminal board to access the system integration coils and contacts.

The card features are useful features of the installed drive. When operating, the board can perform control functions on any external circuit connected to the seven relays. The 531X191RTBAFG4 can also be used to tabulate RTB points and relay contacts. The card's G4 revision, coils, and contacts are suitable for this part of the series. Coil at 24 VDC board rate ± 10%, or 37 mA. The contacts in this card are rated for 2.4A current and rated for 125 VAC or 28 VDC. These contacts also have a rating of 1 mA per 1.0 V.

Board integrity depends on whether the user follows all the installation parameters outlined by GE. Only qualified personnel are allowed to handle and install these boards. If the circuit board is not handled, installed or wired properly, it may cause damage. Wiring instructions for this card can be found in the 531X191RTBAFG4 relay manual and data sheet. Manufacturer General Electric was the original provider of technical support for the board.

531X191RTBAFG4 继电器端子板 执行控制功能

【其他型号推荐】