531X191RTBAFG3 继电器端子板 控制功能

【产品详情】

通用电气开发了531X191RTBAFG3作为继电器端子板。由于该卡是 531X 系列更换板的成员，因此可以安装在 GE 系列的驱动器阵列中。安装时，该板执行两个重要功能。该卡提供七个继电器，用于控制连接的外部电路。它还可以通过端子板为用户提供对线圈和触点的访问。

安装此板时提供了许多有用的功能。531X191RTBAFG3 能够操作连接到七个板载继电器之一的外部电路的控制功能。继电器触点和RTB点的制表也由该设备执行。该板的线圈和触点被评为该系列的 G3 修订版。线圈速率为 115 VAC，频率为 50/60Hz。流向电路板电容的浪涌电流为25 mA，而电流保持在14 mA。板上的触点速率为每个 2.4 A，额定电压为 125 VAC 或 28 VDC。

为了保护主板的完整性，请务必遵循制造商提供的所有概述的安装参数。 只有经过安装驱动器组件培训的人员才应被允许使用此卡。处理或接线不当可能会导致设备损坏。要查看 531X191RTBAFG3 继电器板的接线指南，请参阅器件的数据表和手册。531X板系列的所有成员最初都由通用电气提供技术支持。

531X191RTBAFG3 继电器端子板 控制功能

【英文介绍】

Ge developed 531X191RTBAFG3 as a relay terminal board. Because the card is a member of the 531X series replacement board, it can be installed in the drive array of the GE series. When installed, the board performs two important functions. The card offers seven relays to control the connected external circuitry. It can also provide the user with access to coils and contacts through the terminal board.

This board provides many useful features when installed. The 531X191RTBAFG3 is capable of operating the control functions of an external circuit connected to one of the seven onboard relays. Tabulation of relay contacts and RTB points is also performed by this device. The coil and contacts of the board are rated as the G3 revision of the series. The coil rate is 115 VAC and the frequency is 50/60Hz. The surge current to the board capacitor is 25 mA, while the current is maintained at 14 mA. The contact rates on the board are 2.4 A each and the rated voltage is 125 VAC or 28 VDC.

To protect the integrity of the motherboard, be sure to follow all the installation parameters outlined by the manufacturer. Only personnel trained in installing driver components should be allowed to use this card. Improper handling or wiring may cause damage to the device. To view wiring guidelines for 531X191RTBAFG3 relay boards, refer to the device's data sheet and manual. All members of the 531X board family were initially supported by GE.

531X191RTBAFG3 继电器端子板 控制功能

【其他型号推荐】